From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Dannenberg Date: Wed, 27 Apr 2016 09:43:15 -0500 Subject: [U-Boot] Problem of git clone with http In-Reply-To: <56FE236C.70108@samsung.com> References: <56FDC7EA.9040902@samsung.com> <20160401092341.21f3272c@crub> <56FE236C.70108@samsung.com> Message-ID: <20160427144315.GH2885@borg.dal.design.ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 01, 2016 at 04:29:48PM +0900, Jaehoon Chung wrote: > Hi, > > On 04/01/2016 04:23 PM, Anatolij Gustschin wrote: > > Hi, > > > > On Fri, 01 Apr 2016 09:59:22 +0900 > > Jaehoon Chung jh80.chung at samsung.com wrote: > > ... > >> I have fetched the u-boot/master with http, not git. > >> url = http://git.denx.de/u-boot.git > >> > >> When i saw the gitweb, it seems that v2016.03 was released.. > >> But i can't pull and fetch anything with http.. > > ... > >> There is difference..Does anybody know this problem? > > > > this issue is known, I reported it to our network admin a while > > ago but it hasn't been resolved yet, sorry. > > > >> Now, i can't use git protocol. So i need to use the "http". > > > > for now please try cloning from U-Boot git repo on github: > > > > https://github.com/trini/u-boot.git > I was just banging my head not being able to fetch the latest U-Boot stuff, running into the same issue, and successfully worked around it by using the git:// URL. However it wasn't until I wanted to post about this on this mailing list that I found this thread :) Anyways it seems like this issue already persists for one month without a fix. For folks behind draconian corporate firewalls the http:// URLs are often easier to use, so this is a bit of a trap.... Regards, -- Andreas Dannenberg Texas Instruments Inc