From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 2 May 2016 21:05:20 -0400 Subject: [U-Boot] [U-Boot, v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT In-Reply-To: <1461203293-20462-1-git-send-email-festevam@gmail.com> References: <1461203293-20462-1-git-send-email-festevam@gmail.com> Message-ID: <20160503010520.GL7884@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Apr 20, 2016 at 10:48:13PM -0300, Fabio Estevam wrote: > From: Fabio Estevam > > mx6ul_evk does not come with a eMMC populated, so we should not > define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able > to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: > > U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) > Trying to boot from MMC1 > spl: mmc block read error > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns > MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot > via SD card. > > Signed-off-by: Fabio Estevam Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: