From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot, v3, 11/15] spl: build: ti: add support for secure boot images
Date: Mon, 30 May 2016 14:02:40 -0400 [thread overview]
Message-ID: <20160530180240.GG7419@bill-the-cat> (raw)
In-Reply-To: <1463703055-17484-12-git-send-email-d-allred@ti.com>
On Thu, May 19, 2016 at 07:10:51PM -0500, Daniel Allred wrote:
> Updates the SPL build so that when CONFIG_TI_SECURE_DEVICE
> is in use (which it should be when building for secure parts),
> the TI secure development package is used to create a valid
> secure boot image. The u-boot SPL build processes is NOT aware
> of the details of creating the boot image - all of that information
> is encapsulated in the TI secure development package, which is
> available from TI. More info can be found in README.ti-secure
>
> Right now, two image types are generated, MLO and X-LOADER. The types
> are important, as certain boot modes implemented by the device's ROM
> boot loader require one or the other (they are not equivalent). The
> output filenames are u-boot-spl_HS_MLO and u-boot-spl_HS_X-LOADER. The
> u-boot-spl_HS_MLO image is also copied to a file named MLO, which is
> the name that the device ROM bootloader requires for loading from the
> FAT partition of an SD card (same as on non-secure devices).
>
> Signed-off-by: Daniel Allred <d-allred@ti.com>
> Signed-off-by: Madan Srinivas <madans@ti.com>
>
> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
> Tested-by: Andreas Dannenberg <dannenberg@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160530/e96c6f39/attachment.sig>
next prev parent reply other threads:[~2016-05-30 18:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-20 0:10 [U-Boot] [PATCH v3 00/15] Support for boot image creation for TI secure devices Daniel Allred
2016-05-20 0:10 ` [U-Boot] [PATCH v3 01/15] doc: Add info on using secure devices from TI Daniel Allred
2016-05-30 18:07 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 02/15] arm: am33xx: Kconfig: Add secure device definitions Daniel Allred
2016-05-30 18:01 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 03/15] arm: Kconfig: Add support for AM43xx SoC specific Kconfig Daniel Allred
2016-05-30 18:01 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 04/15] ti: omap-common: Add Kconfig file for secure device support Daniel Allred
2016-05-30 18:01 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 05/15] ti: omap-common: Add commands for generating secure SPL images Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 06/15] ti: AM43xx: config.mk: Add support for generating secure boot images Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-30 18:02 ` Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 07/15] ti: AM43xx: Use CONFIG options from SOC Kconfig Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 08/15] ti: AM43xx: board: Detect AM43xx HS EVM Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 09/15] defconfig: Add a config for AM43xx secure part Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 10/15] ti_omap5_common: Update SPL start address on secure parts Daniel Allred
2016-05-20 13:02 ` Tom Rini
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 11/15] spl: build: ti: add support for secure boot images Daniel Allred
2016-05-30 18:02 ` Tom Rini [this message]
2016-05-20 0:10 ` [U-Boot] [PATCH v3 12/15] ARM: omap-common: Add device type to CPU string Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 13/15] ARM: omap5: add hooks for cpu/SoC fdt fixups Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 14/15] ARM: omap5: add ft_board_setup for dra7xx/am57xx Daniel Allred
2016-05-30 18:02 ` [U-Boot] [U-Boot, v3, " Tom Rini
2016-05-20 0:10 ` [U-Boot] [PATCH v3 15/15] defconfig: ti: Add configs for OMAP5-class secure parts Daniel Allred
2016-05-30 18:03 ` [U-Boot] [U-Boot, v3, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160530180240.GG7419@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox