From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 3 Jun 2016 09:58:13 -0400 Subject: [U-Boot] [U-Boot, 1/4] ARM: DRA7: Update/Correct MPU and CORE OPP_NOM voltage values In-Reply-To: <1464028337-13426-2-git-send-email-s-anna@ti.com> References: <1464028337-13426-2-git-send-email-s-anna@ti.com> Message-ID: <20160603135813.GG7419@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, May 23, 2016 at 01:32:14PM -0500, Anna, Suman wrote: > The current OPP_NOM voltage values defined for the MPU and CORE > voltage domains are based on the initial DRA75x_74x_SR1.1_DM data > manual. As per this DM, the PMIC boot voltage can be set to either > 1.10V or 1.15V for VD_MPU, and either 1.06V or 1.15V for VD_CORE. > While the current values are correct, the latter set of values > are the values that are common across all DRA75x, DRA72x SoCs and > for all current Silicon revisions. So, update both the MPU and CORE > OPP_NOM voltages to 1.15V. > > The macros are also slightly reorganized so that both the MPU and > CORE voltage domain values are defined together. > > Signed-off-by: Suman Anna > Reviewed-by: Lokesh Vutla Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: