U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] armv7: make gpmc_cfg const
Date: Fri, 17 Jun 2016 12:04:03 +0200	[thread overview]
Message-ID: <20160617100403.GB19943@localhost.localdomain> (raw)
In-Reply-To: <20160617100013.GA19253@localhost.localdomain>

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 arch/arm/cpu/armv7/omap-common/mem-common.c | 8 +++-----
 arch/arm/include/asm/arch-omap3/sys_proto.h | 4 ++--
 include/linux/mtd/omap_gpmc.h               | 2 +-
 3 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c
index fc4290c..136a032 100644
--- a/arch/arm/cpu/armv7/omap-common/mem-common.c
+++ b/arch/arm/cpu/armv7/omap-common/mem-common.c
@@ -21,7 +21,7 @@
 #include <command.h>
 #include <linux/mtd/omap_gpmc.h>
 
-struct gpmc *gpmc_cfg;
+const struct gpmc *gpmc_cfg = (struct gpmc *)GPMC_BASE;
 
 #if defined(CONFIG_OMAP34XX)
 /********************************************************
@@ -50,8 +50,8 @@ u32 mem_ok(u32 cs)
 }
 #endif
 
-void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
-			u32 size)
+void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
+				u32 base, u32 size)
 {
 	writel(0, &cs->config7);
 	sdelay(1000);
@@ -75,8 +75,6 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
  *****************************************************/
 void gpmc_init(void)
 {
-	/* putting a blanket check on GPMC based on ZeBu for now */
-	gpmc_cfg = (struct gpmc *)GPMC_BASE;
 #if defined(CONFIG_NOR)
 /* configure GPMC for NOR */
 	const u32 gpmc_regs[GPMC_MAX_REG] = {	STNOR_GPMC_CONFIG1,
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 1be2b15..4c5aa99 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -43,8 +43,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings);
 int identify_nand_chip(int *mfr, int *id);
 void emif4_init(void);
 void gpmc_init(void);
-void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
-			u32 size);
+void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
+				u32 base, u32 size);
 
 void watchdog_init(void);
 void set_muxconf_regs(void);
diff --git a/include/linux/mtd/omap_gpmc.h b/include/linux/mtd/omap_gpmc.h
index 3a75674..f49ea3d 100644
--- a/include/linux/mtd/omap_gpmc.h
+++ b/include/linux/mtd/omap_gpmc.h
@@ -92,6 +92,6 @@ struct gpmc {
 };
 
 /* Used for board specific gpmc initialization */
-extern struct gpmc *gpmc_cfg;
+extern const struct gpmc *gpmc_cfg;
 
 #endif /* __ASM_OMAP_GPMC_H */
-- 
2.1.4

  parent reply	other threads:[~2016-06-17 10:04 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-17 10:00 [U-Boot] [RFC] omap3: single binary supporting all flash types Ladislav Michl
2016-06-17 10:02 ` [U-Boot] [PATCH] armv7: add reset timeout to identify_nand_chip Ladislav Michl
2016-06-17 10:04 ` Ladislav Michl [this message]
2016-06-17 10:05 ` [U-Boot] [RFC] armv7: Introduce enable_gpmc_cs_config Ladislav Michl
2016-06-17 10:07 ` [U-Boot] (no subject) Ladislav Michl
2016-06-17 10:09 ` Ladislav Michl
2016-06-17 10:17 ` [U-Boot] [PATCH] mtd: OneNAND: allow board init function fail Ladislav Michl
2016-06-18 11:08 ` [U-Boot] [RFC] omap3: single binary supporting all flash types Ladislav Michl
2016-06-18 11:12   ` [U-Boot] [PATCH] armv7: introduce set_gpmc_cs0 Ladislav Michl
2016-06-18 11:13   ` [U-Boot] [PATCH] igep00x0: runtime flash detection Ladislav Michl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160617100403.GB19943@localhost.localdomain \
    --to=ladis@linux-mips.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox