From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ehci: mx7: Fix OTG ID detection
Date: Sun, 19 Jun 2016 18:32:18 +0800 [thread overview]
Message-ID: <20160619103217.GA28726@linux-7smt.suse> (raw)
In-Reply-To: <57647E27.7090504@denx.de>
Hi Marek,
On Sat, Jun 18, 2016 at 12:48:07AM +0200, Marek Vasut wrote:
>On 06/17/2016 08:19 AM, Peng Fan wrote:
>> From: Ye Li <ye.li@nxp.com>
>>
>> 1. The offset for phy_status register in usbnc_regs is not correct.
>> 2. We should clear the USBNC_PHYCFG2_ACAENB bit to enable the OTG ID detection,
>> not set it. When the bit is set, the ACA Resistance Detection is enabled,
>> which disables the OTG ID detection, because the internal pull up is off.
>
>So this is one patch which does two things? This should be split into
>two patches then.
Ok. Will fix in V2.
>
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>> Signed-off-by: Ye Li <ye.li@nxp.com>
>> Cc: Marek Vasut <marex@denx.de>
>> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
>> Cc: Stefan Agner <stefan@agner.ch>
>> ---
>> drivers/usb/host/ehci-mx6.c | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
>> index bb48d0d..922ef29 100644
>> --- a/drivers/usb/host/ehci-mx6.c
>> +++ b/drivers/usb/host/ehci-mx6.c
>> @@ -194,8 +194,9 @@ struct usbnc_regs {
>> u32 reserve1[10];
>> u32 phy_cfg1;
>> u32 phy_cfg2;
>> + u32 reserve2[1];
>> u32 phy_status;
>> - u32 reserve2[4];
>> + u32 reserve3[4];
>
>This will also shift all the registers below by 8 bytes, is that correct ?
Yeah. correct.
Thanks,
Peng.
>
>> u32 adp_cfg1;
>> u32 adp_cfg2;
>> u32 adp_status;
>> @@ -207,8 +208,11 @@ static void usb_power_config(int index)
>> (0x10000 * index) + USBNC_OFFSET);
>> void __iomem *phy_cfg2 = (void __iomem *)(&usbnc->phy_cfg2);
>>
>> - /* Enable usb_otg_id detection */
>> - setbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB);
>> + /*
>> + * Clear the ACAENB to enable usb_otg_id detection,
>> + * otherwise it is the ACA detection enabled.
>> + */
>> + clrbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB);
>> }
>>
>> int usb_phy_mode(int port)
>>
>
>
>--
>Best regards,
>Marek Vasut
prev parent reply other threads:[~2016-06-19 10:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-17 6:19 [U-Boot] [PATCH] ehci: mx7: Fix OTG ID detection Peng Fan
2016-06-17 22:48 ` Marek Vasut
2016-06-19 10:32 ` Peng Fan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160619103217.GA28726@linux-7smt.suse \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox