[U-Boot] [PATCH 3/8] xtensa: add core information for the dc232b processor

[Max Filippov <jcmvbkbc@gmail.com>]

Hi Simon,

On Tue, Jul 12, 2016 at 03:56:46PM -0600, Simon Glass wrote:
> On 8 July 2016 at 09:42, Max Filippov <jcmvbkbc@gmail.com> wrote:
> > From: Chris Zankel <chris@zankel.net>
> 
> Commit message?

Ok, will add.

> >
> > Signed-off-by: Chris Zankel <chris@zankel.net>
> > Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
> > ---
> >  arch/xtensa/include/asm/arch-dc232b/core.h    | 422 ++++++++++++++++++++++++++
> >  arch/xtensa/include/asm/arch-dc232b/tie-asm.h | 120 ++++++++
> >  arch/xtensa/include/asm/arch-dc232b/tie.h     | 129 ++++++++
> >  3 files changed, 671 insertions(+)
> >  create mode 100644 arch/xtensa/include/asm/arch-dc232b/core.h
> >  create mode 100644 arch/xtensa/include/asm/arch-dc232b/tie-asm.h
> >  create mode 100644 arch/xtensa/include/asm/arch-dc232b/tie.h
> 
> Reviewed-by: Simon Glass <sjg@chromium.org>
> 
> nits below.
> 
> >
> > diff --git a/arch/xtensa/include/asm/arch-dc232b/core.h b/arch/xtensa/include/asm/arch-dc232b/core.h
> > new file mode 100644
> > index 0000000..7fd1aee
> > --- /dev/null
> > +++ b/arch/xtensa/include/asm/arch-dc232b/core.h
> > @@ -0,0 +1,422 @@
> > +/*
> > + * Xtensa processor core configuration information.
> > + *
> > + * Copyright (c) 1999-2007 Tensilica Inc.
> > + *
> > + * SPDX-License-Identifier:    GPL-2.0+
> > + */
> > +
> > +#ifndef _XTENSA_CORE_CONFIGURATION_H
> > +#define _XTENSA_CORE_CONFIGURATION_H
> > +
> > +
> > +/****************************************************************************
> > +           Parameters Useful for Any Code, USER or PRIVILEGED
> > + ****************************************************************************/
> > +
> > +/*
> > + *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
> > + *  configured, and a value of 0 otherwise.  These macros are always defined.
> > + */
> > +
> > +
> > +/*----------------------------------------------------------------------
> > +                               ISA
> > +  ----------------------------------------------------------------------*/
> > +
> > +#define XCHAL_HAVE_BE                  0       /* big-endian byte ordering */
> > +#define XCHAL_HAVE_WINDOWED            1       /* windowed registers option */
> > +#define XCHAL_NUM_AREGS                        32      /* num of physical addr regs */
> > +#define XCHAL_NUM_AREGS_LOG2           5       /* log2(XCHAL_NUM_AREGS) */
> > +#define XCHAL_MAX_INSTRUCTION_SIZE     3       /* max instr bytes (3..8) */
> > +#define XCHAL_HAVE_DEBUG               1       /* debug option */
> > +#define XCHAL_HAVE_DENSITY             1       /* 16-bit instructions */
> > +#define XCHAL_HAVE_LOOPS               1       /* zero-overhead loops */
> > +#define XCHAL_HAVE_NSA                 1       /* NSA/NSAU instructions */
> > +#define XCHAL_HAVE_MINMAX              1       /* MIN/MAX instructions */
> > +#define XCHAL_HAVE_SEXT                        1       /* SEXT instruction */
> > +#define XCHAL_HAVE_CLAMPS              1       /* CLAMPS instruction */
> > +#define XCHAL_HAVE_MUL16               1       /* MUL16S/MUL16U instructions */
> > +#define XCHAL_HAVE_MUL32               1       /* MULL instruction */
> > +#define XCHAL_HAVE_MUL32_HIGH          0       /* MULUH/MULSH instructions */
> > +#define XCHAL_HAVE_DIV32               1       /* QUOS/QUOU/REMS/REMU instructions */
> > +#define XCHAL_HAVE_L32R                        1       /* L32R instruction */
> > +#define XCHAL_HAVE_ABSOLUTE_LITERALS   1       /* non-PC-rel (extended) L32R */
> > +#define XCHAL_HAVE_CONST16             0       /* CONST16 instruction */
> > +#define XCHAL_HAVE_ADDX                        1       /* ADDX#/SUBX# instructions */
> > +#define XCHAL_HAVE_WIDE_BRANCHES       0       /* B*.W18 or B*.W15 instr's */
> > +#define XCHAL_HAVE_PREDICTED_BRANCHES  0       /* B[EQ/EQZ/NE/NEZ]T instr's */
> > +#define XCHAL_HAVE_CALL4AND12          1       /* (obsolete option) */
> > +#define XCHAL_HAVE_ABS                 1       /* ABS instruction */
> > +/*#define XCHAL_HAVE_POPC              0*/     /* POPC instruction */
> > +/*#define XCHAL_HAVE_CRC               0*/     /* CRC instruction */
> > +#define XCHAL_HAVE_RELEASE_SYNC                1       /* L32AI/S32RI instructions */
> > +#define XCHAL_HAVE_S32C1I              1       /* S32C1I instruction */
> > +#define XCHAL_HAVE_SPECULATION         0       /* speculation */
> > +#define XCHAL_HAVE_FULL_RESET          1       /* all regs/state reset */
> > +#define XCHAL_NUM_CONTEXTS             1       /* */
> > +#define XCHAL_NUM_MISC_REGS            2       /* num of scratch regs (0..4) */
> > +#define XCHAL_HAVE_TAP_MASTER          0       /* JTAG TAP control instr's */
> > +#define XCHAL_HAVE_PRID                        1       /* processor ID register */
> > +#define XCHAL_HAVE_THREADPTR           1       /* THREADPTR register */
> > +#define XCHAL_HAVE_BOOLEANS            0       /* boolean registers */
> > +#define XCHAL_HAVE_CP                  1       /* CPENABLE reg (coprocessor) */
> > +#define XCHAL_CP_MAXCFG                        8       /* max allowed cp id plus one */
> > +#define XCHAL_HAVE_MAC16               1       /* MAC16 package */
> > +#define XCHAL_HAVE_VECTORFPU2005       0       /* vector floating-point pkg */
> > +#define XCHAL_HAVE_FP                  0       /* floating point pkg */
> > +#define XCHAL_HAVE_VECTRA1             0       /* Vectra I  pkg */
> > +#define XCHAL_HAVE_VECTRALX            0       /* Vectra LX pkg */
> > +#define XCHAL_HAVE_HIFI2               0       /* HiFi2 Audio Engine pkg */
> > +
> > +
> > +/*----------------------------------------------------------------------
> 
> Do we need all these lines and stars?

These files are autogenerated, so I tried to avoid editing them.
Sure I can remove these lines and start if absolutely necessary.

-- 
Thanks.
-- Max