* [U-Boot] [PATCH] configs: da850evm: enable bootz command
@ 2016-07-12 10:54 Sekhar Nori
2016-07-12 12:16 ` Tom Rini
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Sekhar Nori @ 2016-07-12 10:54 UTC (permalink / raw)
To: u-boot
Enable bootz command on Texas Instruments DA850 EVM
board. This helps it boot zImage with device-tree
blob passed.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
configs/da850evm_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 0e281a5e672c..40ab975f02b9 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -5,6 +5,7 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
CONFIG_SYS_PROMPT="U-Boot > "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
--
2.9.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [U-Boot] [PATCH] configs: da850evm: enable bootz command
2016-07-12 10:54 [U-Boot] [PATCH] configs: da850evm: enable bootz command Sekhar Nori
@ 2016-07-12 12:16 ` Tom Rini
2016-07-12 17:28 ` Kevin Hilman
2016-07-16 13:51 ` [U-Boot] " Tom Rini
2 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-07-12 12:16 UTC (permalink / raw)
To: u-boot
On Tue, Jul 12, 2016 at 04:24:48PM +0530, Sekhar Nori wrote:
> Enable bootz command on Texas Instruments DA850 EVM
> board. This helps it boot zImage with device-tree
> blob passed.
>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160712/3f7421a0/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] configs: da850evm: enable bootz command
2016-07-12 10:54 [U-Boot] [PATCH] configs: da850evm: enable bootz command Sekhar Nori
2016-07-12 12:16 ` Tom Rini
@ 2016-07-12 17:28 ` Kevin Hilman
2016-07-16 13:51 ` [U-Boot] " Tom Rini
2 siblings, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2016-07-12 17:28 UTC (permalink / raw)
To: u-boot
Sekhar Nori <nsekhar@ti.com> writes:
> Enable bootz command on Texas Instruments DA850 EVM
> board. This helps it boot zImage with device-tree
> blob passed.
>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Thanks! This was the only change I needed to use the latest mainline
u-boot on my da850evm.
Kevin
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] configs: da850evm: enable bootz command
2016-07-12 10:54 [U-Boot] [PATCH] configs: da850evm: enable bootz command Sekhar Nori
2016-07-12 12:16 ` Tom Rini
2016-07-12 17:28 ` Kevin Hilman
@ 2016-07-16 13:51 ` Tom Rini
2 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-07-16 13:51 UTC (permalink / raw)
To: u-boot
On Tue, Jul 12, 2016 at 04:24:48PM +0530, Sekhar Nori wrote:
> Enable bootz command on Texas Instruments DA850 EVM
> board. This helps it boot zImage with device-tree
> blob passed.
>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160716/c1280321/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-07-16 13:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-12 10:54 [U-Boot] [PATCH] configs: da850evm: enable bootz command Sekhar Nori
2016-07-12 12:16 ` Tom Rini
2016-07-12 17:28 ` Kevin Hilman
2016-07-16 13:51 ` [U-Boot] " Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox