From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data
Date: Mon, 25 Jul 2016 12:21:36 +0200 [thread overview]
Message-ID: <20160725122136.6c5b2c10@amdc2363> (raw)
In-Reply-To: <57959BAD.2010304@samsung.com>
Hi Jaehoon,
> Hi All,
>
> On 07/12/2016 09:55 PM, Lukasz Majewski wrote:
> > Hi Jaehoon,
> >
> >> There is no data, it doesn't needs to wait for completing data
> >> transfer. (It seems that it can be removed.)
> >> Almost all timeout error is occured from stop command without data.
> >> After applied this patch, I hope that we don't need to increase
> >> timeout value anymore.
> >
> > This patch fixes issue (in a better way) for Odroid U3 write
> > performance (http://patchwork.ozlabs.org/patch/646932/) and hence
> > should be used.
> >
>
> Is there any other opinion for this patch?
> Who is maintaining u-boot-mmc? Is Pantelis still maintaining
> u-boot-mmc?
>
> Who can apply this patch and patch relevant to mmc?
To be honest, I do look forward to see this patch included to u-boot
master branch.
Addition of some extra Odroid U3 tests hinge on it.
>
> Best Regards,
> Jaehoon Chung
>
> >
> >>
> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> >> ---
> >> drivers/mmc/sdhci.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> >> index 604f18d..0a38a56 100644
> >> --- a/drivers/mmc/sdhci.c
> >> +++ b/drivers/mmc/sdhci.c
> >> @@ -175,7 +175,8 @@ static int sdhci_send_command(struct mmc *mmc,
> >> struct mmc_cmd *cmd, flags = SDHCI_CMD_RESP_LONG;
> >> else if (cmd->resp_type & MMC_RSP_BUSY) {
> >> flags = SDHCI_CMD_RESP_SHORT_BUSY;
> >> - mask |= SDHCI_INT_DATA_END;
> >> + if (data)
> >> + mask |= SDHCI_INT_DATA_END;
> >> } else
> >> flags = SDHCI_CMD_RESP_SHORT;
> >>
> >
> > Acked-by: Lukasz Majewski <l.majewski@samsung.com>
> > Tested-by: Lukasz Majewski <l.majewski@samsung.com>
> >
> > Test HW: Odroid U3 (Exynos4):
> >
> > Odroid # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 1471 ms (21.1 MiB/s)
> > Odroid # ext4write mmc 0:2 0x41000000 /dat_w55.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 3528 ms (8.8 MiB/s)
> >
> > Performance improvement is even better than with previously proposed
> > patches.
> >
> > Test HW: Odroid XU3 (Exynos5):
> >
> > ODROID-XU3 # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 6309 ms (4.9 MiB/s)
> > ODROID-XU3 # ext4write mmc 0:2 0x41000000 /dat_w1.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 4884 ms (6.3 MiB/s)
> >
> >
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
next prev parent reply other threads:[~2016-07-25 10:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 12:18 [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Jaehoon Chung
2016-07-12 12:18 ` [U-Boot] [PATCH 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B Jaehoon Chung
2016-07-12 12:55 ` Lukasz Majewski
2016-08-05 2:24 ` [U-Boot] [U-Boot, " Jaehoon Chung
2016-07-12 12:55 ` [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Lukasz Majewski
2016-07-25 4:55 ` Jaehoon Chung
2016-07-25 10:10 ` Minkyu Kang
2016-07-25 10:21 ` Lukasz Majewski [this message]
2016-07-25 23:23 ` Steve Rae
2016-07-25 23:28 ` Steve Rae
2016-07-26 9:13 ` Lukasz Majewski
2016-07-26 16:10 ` Steve Rae
2016-07-27 5:11 ` Jaehoon Chung
2016-08-01 10:05 ` Lukasz Majewski
2016-08-05 2:24 ` [U-Boot] [U-Boot, " Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160725122136.6c5b2c10@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox