From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vignesh R Date: Mon, 25 Jul 2016 18:40:21 +0530 Subject: [U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575 In-Reply-To: <20160725131023.30656-1-vigneshr@ti.com> References: <20160725131023.30656-1-vigneshr@ti.com> Message-ID: <20160725131023.30656-3-vigneshr@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On DRA7, pcf chip present at address 0x21 on i2c1, is used to switch between cpsw slave0 and slave1. Hence, enable PCF driver for the same. Signed-off-by: Vignesh R --- include/configs/dra7xx_evm.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 0d51aeb86909..4ad8beaf2f75 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -328,4 +328,9 @@ #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 #define CONFIG_EEPROM_BUS_ADDRESS 0 +/* PCF Support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCF8575_GPIO +#endif + #endif /* __CONFIG_DRA7XX_EVM_H */ -- 2.9.2