From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 25 Jul 2016 09:38:39 -0400 Subject: [U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575 In-Reply-To: <20160725131023.30656-3-vigneshr@ti.com> References: <20160725131023.30656-1-vigneshr@ti.com> <20160725131023.30656-3-vigneshr@ti.com> Message-ID: <20160725133839.GI14698@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Jul 25, 2016 at 06:40:21PM +0530, Vignesh R wrote: > On DRA7, pcf chip present at address 0x21 on i2c1, is used to > switch between cpsw slave0 and slave1. Hence, enable PCF > driver for the same. > > Signed-off-by: Vignesh R > --- > include/configs/dra7xx_evm.h | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h > index 0d51aeb86909..4ad8beaf2f75 100644 > --- a/include/configs/dra7xx_evm.h > +++ b/include/configs/dra7xx_evm.h > @@ -328,4 +328,9 @@ > #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 > #define CONFIG_EEPROM_BUS_ADDRESS 0 > > +/* PCF Support */ > +#ifndef CONFIG_SPL_BUILD > +#define CONFIG_PCF8575_GPIO > +#endif We need to invert the logic and undef on SPL, and pick this up normally via Kconfig. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: