From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 4 Aug 2016 11:01:58 -0400 Subject: [U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Message-ID: <20160804150158.GC9942@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hey guys, I just started trying out my Pine64 1GB and mainline U-Boot and I've found that: commit 1a83fb4a17d959d7b037999ab7ed7e62429abe34 Author: Siarhei Siamashka Date: Tue May 31 01:48:06 2016 +0300 sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80 is breaking boot for me. boot0 seems to run fine and then the last bit of output that I get is: boot0: start load other image boot0: Loading BL3-1 Loading file 0 at address 0x40000000,size 0x00000200 success boot0: Loading scp Loading file 2 at address 0x00040000,size 0x0000c200 success set arisc reset to de-assert state Ready to disable icache. Jump to secend Boot. NOTICE: BL3-1: Running in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):d697594 NOTICE: BL3-1: Built : 09:15:57, Aug 4 2016 NOTICE: Configuring AXP PMIC NOTICE: PMIC: already configured for RSB NOTICE: PMIC: setup successful INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 I'm using d697594 from https://github.com/apritzel/arm-trusted-firmware.git for ATF and boot0.img from the 20160701 Debian "longsleep" image. Any ideas? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: