From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/13] am33xx: config.mk: Fix option used to enable SPI SPL image type
Date: Thu, 18 Aug 2016 10:41:41 -0500 [thread overview]
Message-ID: <20160818154146.16788-9-afd@ti.com> (raw)
In-Reply-To: <20160818154146.16788-1-afd@ti.com>
Before the addition of SPL boot media type Kconfig options there was no
way to determine what boot media the SPL would be booted from, so
it was assumed that if the SPL could load U-Boot proper via SPI then
the SPL itself would probably also be loaded from SPI.
Use the new SPL_SPI_BOOT option to enable the generation an SPL image
capable of being booted from SPI, and not have this depend on the SPL's
media loading capabilities.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/cpu/armv7/am33xx/config.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk
index 8e655d7..2f53df8 100644
--- a/arch/arm/cpu/armv7/am33xx/config.mk
+++ b/arch/arm/cpu/armv7/am33xx/config.mk
@@ -34,7 +34,7 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
# Refer to README.ti-secure for more info
#
ALL-y += u-boot-spl_HS_ISSW
-ALL-$(CONFIG_SPL_SPI_SUPPORT) += u-boot-spl_HS_SPI_X-LOADER
+ALL-$(CONFIG_SPL_SPI_BOOT) += u-boot-spl_HS_SPI_X-LOADER
ALL-$(CONFIG_SPL_QSPI_BOOT) += u-boot-spl_HS_XIP_X-LOADER
ALL-$(CONFIG_SPL_NOR_BOOT) += u-boot-spl_HS_XIP_X-LOADER
ALL-$(CONFIG_SPL_NAND_BOOT) += u-boot-spl_HS_X-LOADER
--
2.9.2
next prev parent reply other threads:[~2016-08-18 15:41 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 15:41 [U-Boot] [PATCH 00/13] Cleanups to allow secure boot on AM33xx devices Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
2016-08-19 6:27 ` Heiko Schocher
2016-08-19 19:30 ` Andrew F. Davis
2016-08-19 19:54 ` Tom Rini
2016-08-21 18:35 ` Andrew F. Davis
2016-08-21 18:50 ` Tom Rini
2016-08-21 19:12 ` Andrew F. Davis
2016-08-21 19:33 ` Tom Rini
2016-08-22 14:06 ` Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT " Andrew F. Davis
2016-08-19 4:10 ` Lokesh Vutla
2016-08-19 15:29 ` Andrew F. Davis
2016-08-22 4:23 ` Lokesh Vutla
2016-08-22 12:25 ` Tom Rini
2016-08-22 12:55 ` Simon Glass
2016-08-23 6:15 ` Masahiro Yamada
2016-08-18 15:41 ` [U-Boot] [PATCH 03/13] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE " Andrew F. Davis
2016-08-19 4:12 ` Lokesh Vutla
2016-08-19 12:22 ` Simon Glass
2016-08-18 15:41 ` [U-Boot] [PATCH 04/13] config: am335x_evm: Move CONFIG_SPL_YMODEM_SUPPORT to Kconfig Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 05/13] config: am43xx_evm: " Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 06/13] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
2016-08-19 4:15 ` Lokesh Vutla
2016-08-22 15:26 ` Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 07/13] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
2016-08-18 15:41 ` Andrew F. Davis [this message]
2016-08-18 15:41 ` [U-Boot] [PATCH 09/13] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 10/13] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 11/13] omap: Use SD_BOOT in place of EMMC_BOOT Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 12/13] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
2016-08-18 15:41 ` [U-Boot] [PATCH 13/13] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx Andrew F. Davis
2016-08-19 6:10 ` [U-Boot] [PATCH 00/13] Cleanups to allow secure boot on AM33xx devices Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160818154146.16788-9-afd@ti.com \
--to=afd@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox