From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Sat, 20 Aug 2016 14:47:40 +0200 Subject: [U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. In-Reply-To: <20160820052619.GA31720@gollum.nazgul.ch> References: <20160820052619.GA31720@gollum.nazgul.ch> Message-ID: <20160820144740.059aedac@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Marcus, > Hello, > > While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I > face following issue with U-Boot SPL 2016.09-rc1 on it: > > bash-4.3# cu -l /dev/cuaU0 -s 115200 > Connected to /dev/cuaU0 (speed 115200) > > U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00) > DRAM: 512 MiB > CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from NAND > ### ERROR ### Please RESET the board ### > > Any ideas what change did cause this or where to start looking after? I do not have any idea. What I can only recommend - please use last working release (2015.10) and perform git bisect. > > Thanks, > Marcus > Best regards, Lukasz Majewski -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: