From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P.
Date: Mon, 22 Aug 2016 09:55:01 +0200 [thread overview]
Message-ID: <20160822095501.21d15023@bbrezillon> (raw)
In-Reply-To: <20160821161439.42272264@bbrezillon>
+Glaucio who is facing the same problem but on a cubieboard2.
On Sun, 21 Aug 2016 16:14:39 +0200
Boris Brezillon <boris.brezillon@free-electrons.com> wrote:
> Hi,
>
> On Sun, 21 Aug 2016 12:03:19 +0200
> Hans de Goede <hdegoede@redhat.com> wrote:
>
> > Hi,
> >
> > On 21-08-16 11:01, Marcus Glocker wrote:
> > > On Sat, Aug 20, 2016 at 03:05:38PM -0400, Tom Rini wrote:
> > >
> > >> On Sat, Aug 20, 2016 at 07:26:19AM +0200, Marcus Glocker wrote:
> > >>> Hello,
> > >>>
> > >>> While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I
> > >>> face following issue with U-Boot SPL 2016.09-rc1 on it:
> > >>>
> > >>> bash-4.3# cu -l /dev/cuaU0 -s 115200
> > >>> Connected to /dev/cuaU0 (speed 115200)
> > >>>
> > >>> U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00)
> > >>> DRAM: 512 MiB
> > >>> CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
> > >>> Trying to boot from NAND
> > >>> ### ERROR ### Please RESET the board ###
> > >>>
> > >>> Any ideas what change did cause this or where to start looking after?
>
> Markus, can you share your .config?
> I tested the different bits while submitting the NAND driver and the
> SPL NAND driver improvements and it was working fine.
> I'll try to test 2016.09-rc1 tomorrow.
Just tried to boot a mainline uboot on my CHIP and it boots fine [1].
Here is my .config [2], can you compare yours with this one?
Can you also detail how you flash the images?
Thanks,
Boris
[1]http://code.bulix.org/xr8n68-105114
[2]http://code.bulix.org/hft09x-105116
next prev parent reply other threads:[~2016-08-22 7:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-20 5:26 [U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P Marcus Glocker
2016-08-20 12:47 ` Lukasz Majewski
2016-08-20 19:05 ` Tom Rini
2016-08-21 9:01 ` Marcus Glocker
2016-08-21 10:03 ` Hans de Goede
2016-08-21 14:14 ` Boris Brezillon
2016-08-22 7:55 ` Boris Brezillon [this message]
2016-08-23 3:14 ` Glaucio Klipel
2016-08-23 18:05 ` Marcus Glocker
2016-08-23 19:41 ` Boris Brezillon
2016-08-23 19:59 ` Marcus Glocker
2016-08-23 21:13 ` Tom Rini
2016-08-21 10:16 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160822095501.21d15023@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox