From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH v2 07/11] omap: Use SD_BOOT in place of EMMC_BOOT
Date: Mon, 22 Aug 2016 10:21:27 -0500 [thread overview]
Message-ID: <20160822152131.15340-8-afd@ti.com> (raw)
In-Reply-To: <20160822152131.15340-1-afd@ti.com>
The config option EMMC_BOOT is used in several OMAP based platforms with
the same meaning as the existing SD_BOOT. Convert all uses, no functional
changes.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
board/ti/am335x/mux.c | 4 ++--
configs/am335x_boneblack_defconfig | 2 +-
configs/am335x_boneblack_vboot_defconfig | 3 ++-
configs/am335x_sl50_defconfig | 2 +-
configs/brppt1_mmc_defconfig | 3 ++-
configs/brppt1_spi_defconfig | 3 ++-
include/configs/am335x_evm.h | 2 +-
include/configs/am335x_sl50.h | 2 +-
include/configs/bav335x.h | 2 +-
include/configs/brppt1.h | 6 +++---
10 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 8afa5f9..2d580d2 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -383,9 +383,9 @@ void enable_board_pin_mux(void)
/* Beaglebone LT pinmux */
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_NAND) && defined(CONFIG_SD_BOOT)
configure_module_pin_mux(nand_pin_mux);
-#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_NOR) && defined(CONFIG_SD_BOOT)
configure_module_pin_mux(bone_norcape_pin_mux);
#else
configure_module_pin_mux(mmc1_pin_mux);
diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig
index 5fabff6..93e6678 100644
--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -44,3 +43,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index b47b51f..4dfe04e 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_STACK_R=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
+CONFIG_SYS_EXTRA_OPTIONS="ENABLE_VBOOT"
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -51,3 +51,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
CONFIG_DM_I2C=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 87ea29e..ff4c950 100644
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
@@ -27,3 +26,4 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index cf2800b..9d36530 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_BRPPT1=y
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@@ -35,3 +35,4 @@ CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index fee9973..65a5666 100644
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_BRPPT1=y
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT"
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=-2
CONFIG_HUSH_PARSER=y
@@ -41,3 +41,4 @@ CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ba4c215..6be0e22 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -418,7 +418,7 @@
"512k(u-boot),128k(u-boot-env1)," \
"128k(u-boot-env2),3464k(kernel)," \
"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SYS_MMC_ENV_DEV 1
diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h
index 8454872..2854536 100644
--- a/include/configs/am335x_sl50.h
+++ b/include/configs/am335x_sl50.h
@@ -114,7 +114,7 @@
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
#endif
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index e391c91..8743db4 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -548,7 +548,7 @@ DEFAULT_LINUX_BOOT_ENV \
"512k(u-boot),128k(u-boot-env1)," \
"128k(u-boot-env2),3464k(kernel)," \
"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 6a239b5..69a1adc 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -50,7 +50,7 @@
#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
@@ -59,7 +59,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SPL_MMC_SUPPORT
-#endif /* CONFIG_EMMC_BOOT */
+#endif /* CONFIG_SD_BOOT */
/*
* When we have SPI or NAND flash we expect to be making use of mtdparts,
@@ -269,7 +269,7 @@ MMCARGS
#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
--
2.9.3
next prev parent reply other threads:[~2016-08-22 15:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 15:21 [U-Boot] [PATCH v2 00/11] Allow secure boot on AM33xx devices Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 01/11] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
2016-08-26 20:12 ` Tom Rini
2016-08-22 15:21 ` [U-Boot] [PATCH v2 02/11] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 03/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 04/11] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 05/11] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 06/11] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx Andrew F. Davis
2016-08-22 15:21 ` Andrew F. Davis [this message]
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 08/11] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
2016-08-23 6:08 ` Masahiro Yamada
2016-08-23 15:02 ` Andrew F. Davis
2016-08-26 20:06 ` Tom Rini
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 10/11] spl: Kconfig: Add SPL_<media>_BOOT " Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE " Andrew F. Davis
2016-08-23 5:45 ` Masahiro Yamada
2016-08-23 14:57 ` Andrew F. Davis
2016-08-26 17:59 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160822152131.15340-8-afd@ti.com \
--to=afd@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox