From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 04/11] doc: Update info on using AM33xx secure devices from TI
Date: Thu, 25 Aug 2016 16:45:34 -0500 [thread overview]
Message-ID: <20160825214541.22896-5-afd@ti.com> (raw)
In-Reply-To: <20160825214541.22896-1-afd@ti.com>
Add a section describing the additional boot types used on AM33xx
secure devices.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
doc/README.ti-secure | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/doc/README.ti-secure b/doc/README.ti-secure
index 54c996d..9b0fbf9 100644
--- a/doc/README.ti-secure
+++ b/doc/README.ti-secure
@@ -43,6 +43,38 @@ Booting of U-Boot SPL
The script is basically the only required interface to the TI SECDEV
package for creating a bootable SPL image for secure TI devices.
+ Invoking the script for AM33xx Secure Devices
+ =============================================
+
+ create-boot-image.sh \
+ <IMAGE_FLAG> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR>
+
+ <IMAGE_FLAG> is a value that specifies the type of the image to
+ generate OR the action the image generation tool will take. Valid
+ values are:
+ SPI_X-LOADER - Generates an image for SPI flash (byte swapped)
+ X-LOADER - Generates an image for non-XIP flash
+ MLO - Generates an image for SD/MMC/eMMC media
+ 2ND - Generates an image for USB, UART and Ethernet
+ XIP_X-LOADER - Generates a single stage u-boot for NOR/QSPI XiP
+
+ <INPUT_FILE> is the full path and filename of the public world boot
+ loaderbinary file (depending on the boot media, this is usually
+ either u-boot-spl.bin or u-boot.bin).
+
+ <OUTPUT_FILE> is the full path and filename of the final secure
+ image. The output binary images should be used in place of the standard
+ non-secure binary images (see the platform-specific user's guides and
+ releases notes for how the non-secure images are typically used)
+ u-boot-spl_HS_SPI_X-LOADER - byte swapped boot image for SPI flash
+ u-boot-spl_HS_X-LOADER - boot image for NAND or SD/MMC/eMMC rawmode
+ u-boot-spl_HS_MLO - boot image for SD/MMC/eMMC media
+ u-boot-spl_HS_2ND - boot image for USB, UART and Ethernet
+ u-boot_HS_XIP_X-LOADER - boot image for NOR or QSPI Xip flash
+
+ <SPL_LOAD_ADDR> is the address at which SOC ROM should load the
+ <INPUT_FILE>
+
Invoking the script for AM43xx Secure Devices
=============================================
--
2.9.3
next prev parent reply other threads:[~2016-08-25 21:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-25 21:45 [U-Boot] [PATCH v3 00/11] Allow secure boot on AM33xx devices Andrew F. Davis
2016-08-25 21:45 ` [U-Boot] [PATCH v3 01/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
2016-08-26 21:27 ` Tom Rini
2016-08-29 18:30 ` Andrew F. Davis
2016-08-29 19:00 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 02/11] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
2016-08-26 21:28 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 03/11] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
2016-08-26 21:28 ` Tom Rini
2016-08-25 21:45 ` Andrew F. Davis [this message]
2016-08-26 21:28 ` [U-Boot] [PATCH v3 04/11] doc: Update info on using AM33xx secure devices from TI Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 05/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
2016-08-26 4:46 ` Lokesh Vutla
2016-08-25 21:45 ` [U-Boot] [PATCH v3 06/11] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Andrew F. Davis
2016-08-26 21:28 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 07/11] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
2016-08-26 21:28 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 08/11] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Andrew F. Davis
2016-08-26 5:01 ` Lokesh Vutla
2016-08-30 18:20 ` Andrew F. Davis
2016-08-25 21:45 ` [U-Boot] [PATCH v3 09/11] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
2016-08-26 21:29 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [PATCH v3 10/11] ti_armv7_common: Disable Falcon Mode on HS devices Andrew F. Davis
2016-08-26 21:30 ` Tom Rini
2016-08-25 21:45 ` [U-Boot] [RFC PATCH v3 11/11] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160825214541.22896-5-afd@ti.com \
--to=afd@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox