From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status
Date: Tue, 30 Aug 2016 14:57:18 +0800 [thread overview]
Message-ID: <20160830065716.GA29518@linux-7smt.suse> (raw)
In-Reply-To: <1471939953-11049-1-git-send-email-peng.fan@nxp.com>
Kindly ping..
Thanks,
Peng.
On Tue, Aug 23, 2016 at 04:12:32PM +0800, Peng Fan wrote:
>Add function to read SD_STATUS information.
>According to the information, get erase_timeout/erase_size/erase_offset.
>Add a structure sd_ssr to include the erase related information.
>
>Signed-off-by: Peng Fan <peng.fan@nxp.com>
>Cc: Jaehoon Chung <jh80.chung@samsung.com>
>Cc: Simon Glass <sjg@chromium.org>
>Cc: Bin Meng <bmeng.cn@gmail.com>
>Cc: Stefan Wahren <stefan.wahren@i2se.com>
>Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
>Cc: Kever Yang <kever.yang@rock-chips.com>
>Cc: Eric Nelson <eric@nelint.com>
>Cc: Stephen Warren <swarren@nvidia.com>
>---
>
>I dropped patch [2,3,4]/5 in V2, which is not a must in this optimization case.
>
>V3:
> No change.
>
>V2:
> Address Jaehoon's comments for V1
>
> drivers/mmc/mmc.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/mmc.h | 8 +++++++
> 2 files changed, 76 insertions(+)
>
>diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>index 43ea0bb..0312da9 100644
>--- a/drivers/mmc/mmc.c
>+++ b/drivers/mmc/mmc.c
>@@ -21,6 +21,14 @@
> #include <div64.h>
> #include "mmc_private.h"
>
>+static const unsigned int sd_au_size[] = {
>+ 0, SZ_16K / 512, SZ_32K / 512,
>+ SZ_64K / 512, SZ_128K / 512, SZ_256K / 512,
>+ SZ_512K / 512, SZ_1M / 512, SZ_2M / 512,
>+ SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512,
>+ SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512,
>+};
>+
> #ifndef CONFIG_DM_MMC_OPS
> __weak int board_mmc_getwp(struct mmc *mmc)
> {
>@@ -945,6 +953,62 @@ retry_scr:
> return 0;
> }
>
>+static int sd_read_ssr(struct mmc *mmc)
>+{
>+ int err, i;
>+ struct mmc_cmd cmd;
>+ ALLOC_CACHE_ALIGN_BUFFER(uint, ssr, 16);
>+ struct mmc_data data;
>+ int timeout = 3;
>+ unsigned int au, eo, et, es;
>+
>+ cmd.cmdidx = MMC_CMD_APP_CMD;
>+ cmd.resp_type = MMC_RSP_R1;
>+ cmd.cmdarg = mmc->rca << 16;
>+
>+ err = mmc_send_cmd(mmc, &cmd, NULL);
>+ if (err)
>+ return err;
>+
>+ cmd.cmdidx = SD_CMD_APP_SD_STATUS;
>+ cmd.resp_type = MMC_RSP_R1;
>+ cmd.cmdarg = 0;
>+
>+retry_ssr:
>+ data.dest = (char *)ssr;
>+ data.blocksize = 64;
>+ data.blocks = 1;
>+ data.flags = MMC_DATA_READ;
>+
>+ err = mmc_send_cmd(mmc, &cmd, &data);
>+ if (err) {
>+ if (timeout--)
>+ goto retry_ssr;
>+
>+ return err;
>+ }
>+
>+ for (i = 0; i < 16; i++)
>+ ssr[i] = be32_to_cpu(ssr[i]);
>+
>+ au = (ssr[2] >> 12) & 0xF;
>+ if ((au <= 9) || (mmc->version == SD_VERSION_3)) {
>+ mmc->ssr.au = sd_au_size[au];
>+ es = (ssr[3] >> 24) & 0xFF;
>+ es |= (ssr[2] & 0xFF) << 8;
>+ et = (ssr[3] >> 18) & 0x3F;
>+ if (es && et) {
>+ eo = (ssr[3] >> 16) & 0x3;
>+ mmc->ssr.erase_timeout = (et * 1000) / es;
>+ mmc->ssr.erase_offset = eo * 1000;
>+ }
>+ } else {
>+ debug("Invalid Allocation Unit Size.\n");
>+ }
>+
>+ return 0;
>+}
>+
> /* frequency bases */
> /* divided by 10 to be nice to platforms without floating point */
> static const int fbase[] = {
>@@ -1350,6 +1414,10 @@ static int mmc_startup(struct mmc *mmc)
> mmc_set_bus_width(mmc, 4);
> }
>
>+ err = sd_read_ssr(mmc);
>+ if (err)
>+ return err;
>+
> if (mmc->card_caps & MMC_MODE_HS)
> mmc->tran_speed = 50000000;
> else
>diff --git a/include/mmc.h b/include/mmc.h
>index aa6d5d1..af2595c 100644
>--- a/include/mmc.h
>+++ b/include/mmc.h
>@@ -102,6 +102,7 @@
> #define SD_CMD_SWITCH_UHS18V 11
>
> #define SD_CMD_APP_SET_BUS_WIDTH 6
>+#define SD_CMD_APP_SD_STATUS 13
> #define SD_CMD_ERASE_WR_BLK_START 32
> #define SD_CMD_ERASE_WR_BLK_END 33
> #define SD_CMD_APP_SEND_OP_COND 41
>@@ -392,6 +393,12 @@ struct mmc_config {
> unsigned char part_type;
> };
>
>+struct sd_ssr {
>+ unsigned int au; /* In sectors */
>+ unsigned int erase_timeout; /* In milliseconds */
>+ unsigned int erase_offset; /* In milliseconds */
>+};
>+
> /*
> * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
> * with mmc_get_mmc_dev().
>@@ -426,6 +433,7 @@ struct mmc {
> uint write_bl_len;
> uint erase_grp_size; /* in 512-byte sectors */
> uint hc_wp_grp_size; /* in 512-byte sectors */
>+ struct sd_ssr ssr; /* SD status register */
> u64 capacity;
> u64 capacity_user;
> u64 capacity_boot;
>--
>2.6.2
>
next prev parent reply other threads:[~2016-08-30 6:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20160823081303epcas1p321f50f050922fa219a0a8c1c0ffd06e6@epcas1p3.samsung.com>
2016-08-23 8:12 ` [U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Peng Fan
2016-08-23 8:12 ` [U-Boot] [PATCH V3 2/2] mmc: sd: optimize erase Peng Fan
2016-08-30 9:34 ` Jaehoon Chung
2016-08-30 6:57 ` Peng Fan [this message]
2016-08-30 9:34 ` [U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Jaehoon Chung
2016-08-31 12:50 ` Jaehoon Chung
2016-09-01 2:20 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160830065716.GA29518@linux-7smt.suse \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox