[U-Boot] [PATCH v2 0/3] ARM: TI: Enable DISPLAY_{CPU/BOARD}INFO

Lokesh Vutla
2016-08-30T05:31:31Z

This series adds ID code detection support for AM437x and enables
CONFIG_DISPLAY_{CPU/BOARD}INFO on all TI platforms.

This series is based on top of Andrew's (Kconfig: Separate AM33XX SOC config
from target board config) patch[1]

I specifically did not use tools/moveconfig.py as Tom suggested to select
these configs from targets instead of enabling it in defconfigs.

[1] http://patchwork.ozlabs.org/patch/662954/

Lokesh Vutla (3):
ARM: AM437X: Add Silicon ID support
ARM: TI: Enable DISPLAY_CPUINFO on all SoCs
ARM: TI: Enable DISPLAY_BOARDINFO on all boards

arch/arm/Kconfig | 6 ++++++
arch/arm/cpu/armv7/am33xx/Kconfig | 11 +++++++++++
arch/arm/cpu/armv7/am33xx/sys_info.c | 5 ++++-
arch/arm/cpu/armv7/omap3/Kconfig | 8 ++++++++
arch/arm/cpu/armv7/omap5/Kconfig | 4 ++++
arch/arm/include/asm/arch-am33xx/cpu.h | 3 ++-
arch/arm/mach-keystone/Kconfig | 4 ++++
arch/powerpc/cpu/ppc4xx/Kconfig | 14 ++++++++++++++
board/amcc/acadia/Kconfig | 4 ----
board/amcc/bamboo/Kconfig | 4 ----
board/amcc/bubinga/Kconfig | 4 ----
board/amcc/canyonlands/Kconfig | 4 ----
board/amcc/katmai/Kconfig | 4 ----
board/amcc/kilauea/Kconfig | 4 ----
board/amcc/luan/Kconfig | 4 ----
board/amcc/makalu/Kconfig | 4 ----
board/amcc/redwood/Kconfig | 4 ----
board/amcc/sequoia/Kconfig | 4 ----
board/amcc/walnut/Kconfig | 4 ----
board/amcc/yosemite/Kconfig | 4 ----
board/amcc/yucca/Kconfig | 4 ----
board/liebherr/lwmon5/Kconfig | 4 ----
common/Kconfig | 16 ++++++++++++++++
include/configs/ti_armv7_keystone2.h | 1 -
include/configs/ti_omap4_common.h | 2 --
include/configs/ti_omap5_common.h | 3 ---
26 files changed, 69 insertions(+), 64 deletions(-)

--
2.9.3