From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peng Fan <van.freenix@gmail.com>
Date: Mon, 19 Sep 2016 13:53:46 +0800
Subject: [U-Boot] [PATCH v2 02/17] serial: Kconfig: Add MXC_UART entry
In-Reply-To: <1474058929-17637-3-git-send-email-jagan@amarulasolutions.com>
References: <1474058929-17637-1-git-send-email-jagan@amarulasolutions.com>
 <1474058929-17637-3-git-send-email-jagan@amarulasolutions.com>
Message-ID: <20160919055344.GA15814@linux-7smt.suse>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jagan,
On Sat, Sep 17, 2016 at 02:18:34AM +0530, Jagan Teki wrote:
>Added kconfig for MXC_UART driver.
>
>Cc: Simon Glass <sjg@chromium.org>
>Cc: Fabio Estevam <fabio.estevam@nxp.com>
>Cc: Stefano Babic <sbabic@denx.de>
>Cc: Peng Fan <peng.fan@nxp.com>
>Cc: Matteo Lisi <matteo.lisi@engicam.com>
>Cc: Michael Trimarchi <michael@amarulasolutions.com>
>Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>---
> drivers/serial/Kconfig | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
>index ab5df70..9abf158 100644
>--- a/drivers/serial/Kconfig
>+++ b/drivers/serial/Kconfig
>@@ -295,6 +295,13 @@ config FSL_LPUART
> 	  Select this to enable a Low Power UART for Freescale VF610 and
> 	  QorIQ Layerscape devices.
> 
>+config MXC_UART
>+	bool "IMX serial port support"
>+	depends on MX6

Not only MX6. I think this line could be removed. 
Add "selects MXC_UART" in arch/arm/cpu/armv7/mx6/Kconfig or just add "CONFIG_MXC_UART"
in defconfig.

Regards,
Peng.

>+	help
>+	  If you have a machine based on a Motorola IMX CPU you
>+	  can enable its onboard serial port by enabling this option.
>+
> config PIC32_SERIAL
> 	bool "Support for Microchip PIC32 on-chip UART"
> 	depends on DM_SERIAL && MACH_PIC32
>-- 
>2.7.4
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot