[U-Boot] [PATCH 2/4] ti_omap5_common: Respect USB controller number in fastboot

Sam Protsenko
2016-10-20T15:58:29Z

On "fastboot reboot-bootloader" we check "dofastboot" variable and do
"fastboot 0" command in U-Boot if it's 1. But there are boards which have
USB controller number other than 0, so it should be respected when
performing "fastboot" command.

This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB
controller number to "fastboot" command.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
include/configs/ti_omap5_common.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 29b7d96..144a880 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -110,11 +110,15 @@
DFUARGS \
NETARGS \

+#ifndef CONFIG_FASTBOOT_USB_DEV
+#define CONFIG_FASTBOOT_USB_DEV 0
+#endif
#define CONFIG_BOOTCOMMAND \
"if test ${dofastboot} -eq 1; then " \
"echo Boot fastboot requested, resetting dofastboot ...;" \
"setenv dofastboot 0; saveenv;" \
- "echo Booting into fastboot ...; fastboot 0;" \
+ "echo Booting into fastboot ...; " \
+ "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
"fi;" \
"run findfdt; " \
"run envboot; " \
--
2.9.3