From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sam Protsenko Date: Mon, 24 Oct 2016 18:41:11 +0300 Subject: [U-Boot] [PATCH v2 2/4] ti_omap5_common: Respect USB controller number in fastboot In-Reply-To: <20161024154113.19607-1-semen.protsenko@linaro.org> References: <20161024154113.19607-1-semen.protsenko@linaro.org> Message-ID: <20161024154113.19607-3-semen.protsenko@linaro.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On "fastboot reboot-bootloader" we check "dofastboot" variable and do "fastboot 0" command in U-Boot if it's 1. But there are boards which have USB controller number other than 0, so it should be respected when performing "fastboot" command. This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB controller number to "fastboot" command. Signed-off-by: Sam Protsenko --- Changes in v2: - Remove unnecessary check for CONFIG_FASTBOOT_USB_DEV include/configs/ti_omap5_common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 29b7d96..b85fae3 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -114,7 +114,8 @@ "if test ${dofastboot} -eq 1; then " \ "echo Boot fastboot requested, resetting dofastboot ...;" \ "setenv dofastboot 0; saveenv;" \ - "echo Booting into fastboot ...; fastboot 0;" \ + "echo Booting into fastboot ...; " \ + "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \ "fi;" \ "run findfdt; " \ "run envboot; " \ -- 2.9.3