From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH RESEND v2 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node
Date: Mon, 31 Oct 2016 09:40:34 +0530 [thread overview]
Message-ID: <20161031041035.17506-1-vigneshr@ti.com> (raw)
Update the spi-max-frequency property of m25p80 flash slave to match
that of TI QSPI controller node, so that QSPI operations happen at
maximum supported frequency of 76.8MHz.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
---
v2: No changes
arch/arm/dts/dra7-evm.dts | 2 +-
arch/arm/dts/dra72-evm-common.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts
index fe755c05841d..be36d456206d 100644
--- a/arch/arm/dts/dra7-evm.dts
+++ b/arch/arm/dts/dra7-evm.dts
@@ -505,7 +505,7 @@
spi-max-frequency = <76800000>;
m25p80 at 0 {
compatible = "s25fl256s1","spi-flash";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
diff --git a/arch/arm/dts/dra72-evm-common.dtsi b/arch/arm/dts/dra72-evm-common.dtsi
index b0993e5bf7e0..1e1ca725577f 100644
--- a/arch/arm/dts/dra72-evm-common.dtsi
+++ b/arch/arm/dts/dra72-evm-common.dtsi
@@ -441,7 +441,7 @@
spi-max-frequency = <76800000>;
m25p80 at 0 {
compatible = "s25fl256s1", "spi-flash";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
--
2.10.2
next reply other threads:[~2016-10-31 4:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-31 4:10 Vignesh R [this message]
2016-10-31 4:10 ` [U-Boot] [PATCH RESEND v2 2/2] spi: ti_qspi: Fix baudrate divider calculation Vignesh R
2016-10-31 9:24 ` Jagan Teki
2016-11-04 11:01 ` Jagan Teki
2016-11-05 10:36 ` R, Vignesh
2016-10-31 11:54 ` [U-Boot] [PATCH RESEND v2 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node Tom Rini
2016-10-31 15:40 ` R, Vignesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161031041035.17506-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox