From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings
Date: Fri, 4 Nov 2016 12:59:46 +0100 [thread overview]
Message-ID: <20161104115946.GC7713@localhost.localdomain> (raw)
In-Reply-To: <20161104114711.GA7540@localhost.localdomain>
Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and
Hynix H27S4G6F2DKA-BM
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
Changes in v2:
- None
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 71688cc..669f3dd 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -84,10 +84,22 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
int mfr, id, err = identify_nand_chip(&mfr, &id);
timings->mr = MICRON_V_MR_165;
- if (!err && mfr == NAND_MFR_MICRON) {
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
+ if (!err) {
+ switch (mfr) {
+ case NAND_MFR_HYNIX:
+ timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_200;
+ timings->ctrlb = HYNIX_V_ACTIMB_200;
+ break;
+ case NAND_MFR_MICRON:
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ break;
+ default:
+ /* Should not happen... */
+ break;
+ }
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
} else {
--
2.1.4
next prev parent reply other threads:[~2016-11-04 11:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-20 9:04 [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Ladislav Michl
2016-09-20 9:07 ` [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-09-20 12:52 ` Tom Rini
2016-09-20 22:44 ` Ladislav Michl
2016-09-20 23:45 ` Tom Rini
2016-09-20 23:52 ` Ladislav Michl
2016-09-21 0:26 ` Tom Rini
2016-09-21 9:39 ` Ladislav Michl
2016-09-21 11:46 ` Enric Balletbo Serra
2016-09-21 12:51 ` Tom Rini
2016-09-21 13:46 ` Enric Balletbo Serra
2016-09-21 14:02 ` Tom Rini
2016-09-22 5:12 ` Ladislav Michl
2016-09-20 9:09 ` [U-Boot] [PATCH 3/3] igep00x0: add Hynix timings Ladislav Michl
2016-09-20 15:41 ` [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Enric Balletbo Serra
2016-09-20 23:10 ` Ladislav Michl
2016-11-04 11:47 ` Ladislav Michl
2016-11-04 11:55 ` [U-Boot] [PATCHv2 " Ladislav Michl
[not found] ` <ef3936d3-3967-bc71-4fdc-7a78b12a3c45@osg.samsung.com>
2016-11-04 17:21 ` Ladislav Michl
2016-11-04 19:34 ` Javier Martinez Canillas
2016-11-04 19:36 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot, PATCHv2, " Tom Rini
2016-11-04 11:57 ` [U-Boot] [PATCHv2 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-11-04 19:37 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,2/3] " Tom Rini
2016-11-04 11:59 ` Ladislav Michl [this message]
2016-11-04 19:39 ` [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,3/3] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161104115946.GC7713@localhost.localdomain \
--to=ladis@linux-mips.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox