From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 21 Nov 2016 21:48:13 -0500 Subject: [U-Boot] [U-Boot, v2, 3/3] arm: dra7xx: Unify Android partition table In-Reply-To: <20161031175346.6943-1-semen.protsenko@linaro.org> References: <20161031175346.6943-1-semen.protsenko@linaro.org> Message-ID: <20161122024813.GS2546@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Oct 31, 2016 at 07:53:46PM +0200, Semen Protsenko wrote: > Make Android partition table the same as for AM57x EVM. > > 1. Make "bootloader" partition start from 0x300 sectors offset, so > DRA7 is bootable in Android mode (see > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). > 2. Increase "bootloader" partition size, because size of u-boot.img is > about 632 KiB (when building DT defconfig, with FIT image enabled). > 3. Specify "reserved" partition explicitly, rather than specifying > "efs" partition start. Reserved area will be used to store U-Boot > environment on eMMC. It's convenient to have it exposed explicitly > so we can read/write U-Boot environment. > 4. Keep all Android partitions locations intact, by reducing > "reserved" partition size. CONFIG_ENV_SIZE is considered. > > Signed-off-by: Sam Protsenko Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: