[U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support

[Boris Brezillon <boris.brezillon@free-electrons.com>]

On Tue, 22 Nov 2016 13:38:39 +0100
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:

> From: Hans de Goede <hdegoede@redhat.com>
> 
> Enable the NAND and UBI support in the configuration header so that we can
> (finally) use it.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  board/sunxi/Kconfig            |  8 ++++++++
>  include/configs/sunxi-common.h | 14 ++++++++++++++
>  2 files changed, 22 insertions(+), 0 deletions(-)
> 
> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> index e1d4ab148f08..c6a620a20167 100644
> --- a/board/sunxi/Kconfig
> +++ b/board/sunxi/Kconfig
> @@ -460,6 +460,14 @@ config AXP_GPIO
>  	---help---
>  	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
>  
> +if NAND_SUNXI
> +config CMD_NAND
> +	default y
> +
> +config CMD_UBI
> +	default y
> +endif
> +
>  config VIDEO
>  	bool "Enable graphical uboot console on HDMI, LCD or VGA"
>  	depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index fd2677ba14a4..feedd9f8811b 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -132,6 +132,20 @@
>  #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
>  #define CONFIG_SYS_NAND_ONFI_DETECTION
>  #define CONFIG_SYS_MAX_NAND_DEVICE 8
> +
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +#endif
> +
> +#ifdef CONFIG_CMD_NAND
> +#define CONFIG_CMD_NAND_TRIMFFS
> +#endif
> +
> +#ifdef CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
>  #endif
>  
>  #ifdef CONFIG_SPL_SPI_SUNXI

Shouldn't we add all these MTD/NAND/UBI/UBIFS related options in
Kconfig too?