From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 22 Nov 2016 10:24:27 -0500 Subject: [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support In-Reply-To: <55a34bf3e571b4af63c9b7ca913b51402ab486b2.1479817585.git-series.maxime.ripard@free-electrons.com> References: <55a34bf3e571b4af63c9b7ca913b51402ab486b2.1479817585.git-series.maxime.ripard@free-electrons.com> Message-ID: <20161122152427.GV2546@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Nov 22, 2016 at 01:38:39PM +0100, Maxime Ripard wrote: > From: Hans de Goede > > Enable the NAND and UBI support in the configuration header so that we can > (finally) use it. > > Signed-off-by: Hans de Goede > Signed-off-by: Maxime Ripard > --- > board/sunxi/Kconfig | 8 ++++++++ > include/configs/sunxi-common.h | 14 ++++++++++++++ > 2 files changed, 22 insertions(+), 0 deletions(-) > > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index e1d4ab148f08..c6a620a20167 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -460,6 +460,14 @@ config AXP_GPIO > ---help--- > Say Y here to enable support for the gpio pins of the axp PMIC ICs. > > +if NAND_SUNXI > +config CMD_NAND > + default y > + > +config CMD_UBI > + default y > +endif We want to move away from adding 'default y' to board/*/Kconfig and instead have 'default y if ...' where the option is declared. In this particular case we have a TODO of adding a NAND option that would be used to hide things like CMD_NAND and other sub-sections rather than using CMD_NAND for everything. That said, we've just got 2 sunxi boards with NAND today right? Maybe we shouldn't make this default for all sunxi boards yet, yes? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: