public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Fabien Parent <fparent@baylibre.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Date: Tue, 22 Nov 2016 18:13:31 +0100	[thread overview]
Message-ID: <20161122171333.30192-3-fparent@baylibre.com> (raw)
In-Reply-To: <20161122171333.30192-1-fparent@baylibre.com>

The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---

V1 -> V2

    * New patch

---
 include/configs/omapl138_lcdk.h | 42 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index ce3a8f4..2cdf892 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -31,6 +31,7 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
+#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
@@ -80,6 +81,47 @@
 #define CONFIG_SYS_DA850_PLL1_PLLM     21
 
 /*
+ * DDR2 memory configuration
+ */
+#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
+					DV_DDR_PHY_EXT_STRBEN | \
+					(0x5 << DV_DDR_PHY_RD_LATENCY_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDBCR (		  \
+	(1 << DV_DDR_SDCR_DDR2EN_SHIFT)		| \
+	(1 << DV_DDR_SDCR_DDREN_SHIFT)		| \
+	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT)	| \
+	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT)	| \
+	(4 << DV_DDR_SDCR_CL_SHIFT)		| \
+	(3 << DV_DDR_SDCR_IBANK_SHIFT)		| \
+	(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
+
+/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
+#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR (		  \
+	(19 << DV_DDR_SDTMR1_RFC_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RP_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RCD_SHIFT)		| \
+	(2 << DV_DDR_SDTMR1_WR_SHIFT)		| \
+	(6 << DV_DDR_SDTMR1_RAS_SHIFT)		| \
+	(8 << DV_DDR_SDTMR1_RC_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RRD_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_WTR_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		  \
+	(7 << DV_DDR_SDTMR2_RASMAX_SHIFT)	| \
+	(2 << DV_DDR_SDTMR2_XP_SHIFT)		| \
+	(0 << DV_DDR_SDTMR2_ODT_SHIFT)		| \
+	(10 << DV_DDR_SDTMR2_XSNR_SHIFT)	| \
+	(199 << DV_DDR_SDTMR2_XSRD_SHIFT)	| \
+	(1 << DV_DDR_SDTMR2_RTP_SHIFT)		| \
+	(2 << DV_DDR_SDTMR2_CKE_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000492
+#define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
+
+/*
  * Serial Driver info
  */
 #define CONFIG_SYS_NS16550_SERIAL
-- 
2.10.2

  parent reply	other threads:[~2016-11-22 17:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-22 17:13 [U-Boot] [PATCH v2 0/4] davinci: omapl138_lcdk: fix a few bugs for SPL boot Fabien Parent
2016-11-22 17:13 ` [U-Boot] [PATCH v2 1/4] davinci: omapl138_lcdk: configure pll0 Fabien Parent
2016-11-22 18:03   ` Tom Rini
2016-11-22 17:13 ` Fabien Parent [this message]
2016-11-22 18:10   ` [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2 Tom Rini
2016-11-28 13:38     ` Fabien Parent
2016-11-28 15:05       ` Tom Rini
2016-11-22 17:13 ` [U-Boot] [PATCH v2 3/4] davinci: da850evm: fix empty boot method list in the SPL Fabien Parent
2016-11-22 17:13 ` [U-Boot] [PATCH v2 4/4] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot Fabien Parent
2016-11-22 18:13   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161122171333.30192-3-fparent@baylibre.com \
    --to=fparent@baylibre.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox