From: Vladimir Zapolskiy <vz@mleia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND][PATCH 09/24] sh4: remove __io config options from r2dplus and r7780mp boards
Date: Mon, 28 Nov 2016 00:15:21 +0200 [thread overview]
Message-ID: <20161127221536.9577-10-vz@mleia.com> (raw)
In-Reply-To: <20161127221536.9577-1-vz@mleia.com>
Defined __io is no-op for the SH architecture and it can be removed
from board files without any functional change.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
---
arch/sh/include/asm/io.h | 10 ----------
include/configs/r2dplus.h | 1 -
include/configs/r7780mp.h | 1 -
3 files changed, 12 deletions(-)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 5dc27be..5cb000c 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -68,13 +68,6 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
#define __raw_base_readl(base, off) __arch_base_getl(base, off)
/*
- * Now, pick up the machine-defined IO definitions
- */
-#if 0 /* XXX###XXX */
-#include <asm/arch/io.h>
-#endif /* XXX###XXX */
-
-/*
* IO port access primitives
* -------------------------
*
@@ -82,9 +75,6 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
* mapped. Note that these are defined to perform little endian accesses
* only. Their primary purpose is to access PCI and ISA peripherals.
*
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
* Note that we prevent GCC re-ordering or caching values in expressions
* by introducing sequence points into the in*() definitions. Note that
* __raw_* do not guarantee this behaviour.
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 477f035..2186915 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -91,7 +91,6 @@
#define CONFIG_SH4_PCI
#define CONFIG_SH7751_PCI
#define CONFIG_PCI_SCAN_SHOW 1
-#define __io
#define __mem_pci
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index d4f200a..42d5135 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -100,7 +100,6 @@
#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE
#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE
#define CONFIG_PCI_SCAN_SHOW 1
-#define __io
#define __mem_pci
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
--
2.10.2
next prev parent reply other threads:[~2016-11-27 22:15 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-27 22:15 [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes Vladimir Zapolskiy
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 01/24] sh4: cache: correct dcache flush to invalidate with write-back Vladimir Zapolskiy
2016-12-03 23:48 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 02/24] sh4: cache: correct flush_cache() to writeback and invalidate Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:48 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 03/24] sh3: remove unused cache.c file from being built Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:49 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 04/24] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:52 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 05/24] sh: cache: don't modify CCR from P1 area Vladimir Zapolskiy
2016-12-03 23:52 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 06/24] sh4: cache: move exported cache manipulation functions into cache.c Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:53 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 07/24] pci: sh7751: fix up PCI I/O space address Vladimir Zapolskiy
2016-12-03 23:53 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 08/24] pci: sh7751: map PCI memory space into SDRAM Vladimir Zapolskiy
2016-12-03 23:56 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` Vladimir Zapolskiy [this message]
2016-11-30 0:33 ` [U-Boot] [RESEND][PATCH 09/24] sh4: remove __io config options from r2dplus and r7780mp boards Simon Glass
2016-12-04 0:35 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 10/24] r2dplus: use P1 area space for text base and PCI system memory Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:36 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 11/24] r2dplus: select rtl8139 driver in defconfig Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:36 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 12/24] common: sh: add necessary define bits to board_f Vladimir Zapolskiy
2016-12-04 0:37 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 13/24] sh4: use single u-boot linker script for all boards Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:37 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 14/24] sh: place board lowlevel_init code in the beginning of .text Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:38 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 15/24] sh: define entry point and reloc_dst inside a linker script Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:39 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 16/24] sh: add MEMORY command to a shared " Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:39 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 17/24] sh: remove undefined DEBUG preprocessor token from board config files Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:40 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 18/24] sh: define CONFIG_DISPLAY_BOARDINFO to print board information Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:41 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 19/24] sh: add common dram_init() function for all boards Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:41 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 20/24] sh: add shared relocate_code() function and call board_init_r() Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:42 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 21/24] sh4: fix start.S by calling board_init_f() after first code relocation Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:42 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 22/24] sh: share the correct version of start.S among all cpus Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:43 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 23/24] sh: generate position independent code for all platforms Vladimir Zapolskiy
2016-12-04 0:43 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 24/24] r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes Vladimir Zapolskiy
2016-12-04 0:44 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
[not found] ` <20161128154357.GD2546@bill-the-cat>
2016-11-29 0:58 ` [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes Vladimir Zapolskiy
2016-11-29 1:22 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161127221536.9577-10-vz@mleia.com \
--to=vz@mleia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox