From: Vladimir Zapolskiy <vz@mleia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND][PATCH 10/24] r2dplus: use P1 area space for text base and PCI system memory
Date: Mon, 28 Nov 2016 00:15:22 +0200 [thread overview]
Message-ID: <20161127221536.9577-11-vz@mleia.com> (raw)
In-Reply-To: <20161127221536.9577-1-vz@mleia.com>
While both options are acceptable use P1 area physical addresses
instead of external memory space of text base and PCI system memory
for unification purposes, all other supported superh boards have the
same selection.
This allows to easily ensure that CONFIG_SYS_TEXT_BASE is located
within available DRAM.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
---
include/configs/r2dplus.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 2186915..21bfe72 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -26,10 +26,10 @@
#define CONFIG_ENV_OVERWRITE 1
/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE (0x8C000000)
-#define CONFIG_SYS_SDRAM_SIZE (0x04000000)
+#define CONFIG_SYS_SDRAM_BASE 0x8C000000
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
-#define CONFIG_SYS_TEXT_BASE 0x0FFC0000
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE 256
@@ -99,8 +99,8 @@
#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */
-#define CONFIG_PCI_SYS_BUS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
-#define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
+#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
#endif /* __CONFIG_H */
--
2.10.2
next prev parent reply other threads:[~2016-11-27 22:15 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-27 22:15 [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes Vladimir Zapolskiy
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 01/24] sh4: cache: correct dcache flush to invalidate with write-back Vladimir Zapolskiy
2016-12-03 23:48 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 02/24] sh4: cache: correct flush_cache() to writeback and invalidate Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:48 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 03/24] sh3: remove unused cache.c file from being built Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:49 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 04/24] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:52 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 05/24] sh: cache: don't modify CCR from P1 area Vladimir Zapolskiy
2016-12-03 23:52 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 06/24] sh4: cache: move exported cache manipulation functions into cache.c Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-03 23:53 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 07/24] pci: sh7751: fix up PCI I/O space address Vladimir Zapolskiy
2016-12-03 23:53 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 08/24] pci: sh7751: map PCI memory space into SDRAM Vladimir Zapolskiy
2016-12-03 23:56 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 09/24] sh4: remove __io config options from r2dplus and r7780mp boards Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:35 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` Vladimir Zapolskiy [this message]
2016-11-30 0:33 ` [U-Boot] [RESEND][PATCH 10/24] r2dplus: use P1 area space for text base and PCI system memory Simon Glass
2016-12-04 0:36 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 11/24] r2dplus: select rtl8139 driver in defconfig Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:36 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 12/24] common: sh: add necessary define bits to board_f Vladimir Zapolskiy
2016-12-04 0:37 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 13/24] sh4: use single u-boot linker script for all boards Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:37 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 14/24] sh: place board lowlevel_init code in the beginning of .text Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:38 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 15/24] sh: define entry point and reloc_dst inside a linker script Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:39 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 16/24] sh: add MEMORY command to a shared " Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:39 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 17/24] sh: remove undefined DEBUG preprocessor token from board config files Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:40 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 18/24] sh: define CONFIG_DISPLAY_BOARDINFO to print board information Vladimir Zapolskiy
2016-11-30 0:33 ` Simon Glass
2016-12-04 0:41 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 19/24] sh: add common dram_init() function for all boards Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:41 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 20/24] sh: add shared relocate_code() function and call board_init_r() Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:42 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 21/24] sh4: fix start.S by calling board_init_f() after first code relocation Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:42 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 22/24] sh: share the correct version of start.S among all cpus Vladimir Zapolskiy
2016-11-30 0:34 ` Simon Glass
2016-12-04 0:43 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 23/24] sh: generate position independent code for all platforms Vladimir Zapolskiy
2016-12-04 0:43 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
2016-11-27 22:15 ` [U-Boot] [RESEND][PATCH 24/24] r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes Vladimir Zapolskiy
2016-12-04 0:44 ` [U-Boot] [U-Boot, RESEND, " Tom Rini
[not found] ` <20161128154357.GD2546@bill-the-cat>
2016-11-29 0:58 ` [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes Vladimir Zapolskiy
2016-11-29 1:22 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161127221536.9577-11-vz@mleia.com \
--to=vz@mleia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox