From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tom Rini <trini@konsulko.com>
Date: Thu, 1 Dec 2016 10:32:24 -0500
Subject: [U-Boot] [PATCH] am57xx: Set tps659038 PMIC GPIO7 pad mux value
 to POWERHOLD
In-Reply-To: <1480498373-9497-1-git-send-email-j-keerthy@ti.com>
References: <1480498373-9497-1-git-send-email-j-keerthy@ti.com>
Message-ID: <20161201153224.GS2546@bill-the-cat>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wed, Nov 30, 2016 at 03:02:53PM +0530, Keerthy wrote:

> The GPIO7 pad mux should be programmed to POWERHOLD value
> as per board design. In cases where the PMIC is shut off the
> mux is set to GPIO7 mode. So during initialization to be on the
> safer side set the mode to POWERHOLD.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161201/0b96b34a/attachment.sig>