From: Francesco Dolcini <francesco@dolcini.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [BUG report] imx6: CACHE Misaligned operation
Date: Wed, 14 Dec 2016 12:31:22 +0100 [thread overview]
Message-ID: <20161214113122.GA21915@dev1> (raw)
Dear all,
I am trying current U-Boot master on solidrun microsom i.MX6 and I get a CACHE
error when accessing SD device:
U-Boot SPL 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06)
Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
U-Boot 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06 +0100)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 57C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x8ffbaf6c
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x8ffbb76c
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x8ffbaf6c
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x8ffbb76c
** First descriptor is NOT a primary desc on 0:1 **
*** Warning - bad CRC, using default environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC
Error: FEC address not set.
Hit any key to stop autoboot: 0
=> version
U-Boot 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06 +0100)
arm-linux-gnueabihf-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412
GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02
U-Boot version is 53e8ca22538c2cec691fe74098684a359302688c with 54e4fcfa3c749a789192e83740a53234182f4ca3 reverted.
I have tried building also with gcc 4.8 without any improvement.
I have not verified if SD is working correctly.
I am using mx6cuboxi_defconfig without any modification.
U-Boot v2016.03 is not showing the problem.
For the sake of completeness the board is a solidrun SOM i4Pro Rev-1.5 on a
HummingBoard2 Edge Rev-1.2
Thanks,
Francesco
reply other threads:[~2016-12-14 11:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161214113122.GA21915@dev1 \
--to=francesco@dolcini.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox