From: Maxim Sloyko <maxims@google.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/12] aspeed/ast2500: Common board init functions for ast2500 based boards
Date: Wed, 4 Jan 2017 11:46:53 -0800 [thread overview]
Message-ID: <20170104194656.124368-10-maxims@google.com> (raw)
In-Reply-To: <20170104194656.124368-1-maxims@google.com>
Signed-off-by: Maxim Sloyko <maxims@google.com>
---
arch/arm/mach-aspeed/Makefile | 2 +-
arch/arm/mach-aspeed/ast2500-board.c | 74 ++++++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-aspeed/ast2500-board.c
diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile
index 1f7af71b03..9d29ff7f6f 100644
--- a/arch/arm/mach-aspeed/Makefile
+++ b/arch/arm/mach-aspeed/Makefile
@@ -5,4 +5,4 @@
#
obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
-obj-$(CONFIG_ASPEED_AST2500) += ast2500/
+obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o
diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c
new file mode 100644
index 0000000000..5b2b0ce132
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -0,0 +1,74 @@
+#include <common.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/wdt.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/uclass.h>
+#include <linux/err.h>
+#include <ram.h>
+#include <timer.h>
+
+/* Second Watchdog Timer by default is configured
+ * to trigger secondary boot source.
+ */
+#define AST_2ND_BOOT_WDT (1)
+
+/* Third Watchdog Timer by default is configured
+ * to toggle Flash address mode switch before reset.
+ */
+#define AST_FLASH_ADDR_DETECT_WDT (2)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void lowlevel_init(void)
+{
+ /*
+ * These two watchdogs need to be stopped as soon as possible,
+ * otherwise the board might hang. By default they are set to
+ * a very short timeout and even simple debug write to serial
+ * console early in the init process might cause them to fire.
+ */
+ struct ast_wdt *flash_addr_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_FLASH_ADDR_DETECT_WDT);
+
+ clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
+
+#ifndef CONFIG_FIRMWARE_2ND_BOOT
+ struct ast_wdt *sec_boot_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_2ND_BOOT_WDT);
+
+ clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
+#endif
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM FAIL1\r\n");
+ return ret;
+ }
+
+ struct ram_info ram;
+ ret = ram_get_info(dev, &ram);
+ if (ret) {
+ debug("DRAM FAIL2\r\n");
+ return ret;
+ }
+
+
+ gd->ram_size = ram.size;
+ return 0;
+}
+
--
2.11.0.390.gc69c2f50cf-goog
next prev parent reply other threads:[~2017-01-04 19:46 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-04 19:46 [U-Boot] [PATCH 00/12] arm: aspeed: Basic support for Aspeed AST2500 part and eval board Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 01/12] aspeed: Add mach-aspeed directory and basic Kconfig Maxim Sloyko
2017-01-04 19:58 ` Rick Altherr
2017-01-04 20:23 ` Tom Rini
2017-01-14 17:13 ` Simon Glass
2017-01-18 0:15 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 02/12] aspeed: Add support for Watchdot Timer Maxim Sloyko
2017-01-04 20:58 ` Tom Rini
2017-01-14 17:13 ` Simon Glass
2017-01-04 19:46 ` [U-Boot] [PATCH 03/12] aspeed: Add Timer Support Maxim Sloyko
2017-01-04 20:58 ` Tom Rini
2017-01-14 17:13 ` Simon Glass
2017-01-17 17:57 ` Maxim Sloyko
2017-01-17 21:37 ` Simon Glass
2017-01-17 23:59 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 04/12] aspeed: Add sysreset driver Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-04 19:46 ` [U-Boot] [PATCH 05/12] aspeed/ast2500: Device Tree and bindings for some of the clocks Maxim Sloyko
2017-01-04 20:58 ` Tom Rini
2017-01-05 1:18 ` Maxim Sloyko
2017-01-05 3:26 ` Tom Rini
2017-01-05 22:20 ` Maxim Sloyko
2017-01-14 17:13 ` Simon Glass
2017-01-17 23:27 ` Maxim Sloyko
2017-01-21 3:52 ` Simon Glass
2017-01-23 17:52 ` Maxim Sloyko
2017-01-23 19:51 ` Simon Glass
2017-01-04 19:46 ` [U-Boot] [PATCH 06/12] aspeed/ast2500: Add Clock Driver Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-17 23:18 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 07/12] aspeed/ast2500: Helper function to get access to SCU Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-17 22:27 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 08/12] aspeed/ast2500: Add SDRAM MC driver Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-18 20:16 ` Maxim Sloyko
2017-01-04 19:46 ` Maxim Sloyko [this message]
2017-01-14 17:14 ` [U-Boot] [PATCH 09/12] aspeed/ast2500: Common board init functions for ast2500 based boards Simon Glass
2017-01-17 20:17 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 10/12] aspeed: Common configuration parameters for aspeed boards Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-17 20:02 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 11/12] aspeed: Device Tree for ast2500 Eval Board Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-17 19:51 ` Maxim Sloyko
2017-01-04 19:46 ` [U-Boot] [PATCH 12/12] aspeed: Configuration for ast2500 eval board Maxim Sloyko
2017-01-14 17:14 ` Simon Glass
2017-01-17 19:46 ` Maxim Sloyko
2017-01-21 3:51 ` Simon Glass
2017-01-04 20:26 ` [U-Boot] [PATCH 00/12] arm: aspeed: Basic support for Aspeed AST2500 part and " Tom Rini
2017-01-04 22:47 ` Maxim Sloyko
2017-01-04 20:58 ` Tom Rini
2017-01-05 22:42 ` [U-Boot] [PATCH v1 0/4] " Maxim Sloyko
2017-01-05 22:42 ` [U-Boot] [PATCH v1 1/4] aspeed: Add drivers common to all Aspeed SoCs Maxim Sloyko
2017-01-05 22:42 ` [U-Boot] [PATCH v1 2/4] aspeed: Add basic ast2500 specific drivers and configuration Maxim Sloyko
2017-01-05 22:42 ` [U-Boot] [PATCH v1 3/4] aspeed: Board init functions and common configs for ast2500 based boards Maxim Sloyko
2017-01-05 22:42 ` [U-Boot] [PATCH v1 4/4] aspeed: Support for ast2500 Eval Board Maxim Sloyko
2017-01-10 1:50 ` [U-Boot] [PATCH v2 0/4] arm: aspeed: Basic support for Aspeed AST2500 part and eval board Maxim Sloyko
2017-01-10 1:50 ` [U-Boot] [PATCH v2 1/4] aspeed: Add drivers common to all Aspeed SoCs Maxim Sloyko
2017-01-11 3:20 ` Tom Rini
2017-01-10 1:50 ` [U-Boot] [PATCH v2 2/4] aspeed: Add basic ast2500 specific drivers and configuration Maxim Sloyko
2017-01-11 3:20 ` Tom Rini
2017-01-10 1:50 ` [U-Boot] [PATCH v2 3/4] aspeed: Board init functions and common configs for ast2500 based boards Maxim Sloyko
2017-01-11 3:20 ` Tom Rini
2017-01-11 23:40 ` Maxim Sloyko
2017-01-10 1:50 ` [U-Boot] [PATCH v2 4/4] aspeed: Support for ast2500 Eval Board Maxim Sloyko
2017-01-11 3:20 ` Tom Rini
2017-01-11 23:45 ` [U-Boot] [PATCH v3 0/4] arm: aspeed: Basic support for Aspeed AST2500 part and eval board Maxim Sloyko
2017-01-11 23:45 ` [U-Boot] [PATCH v3 1/4] aspeed: Add drivers common to all Aspeed SoCs Maxim Sloyko
2017-01-13 0:51 ` Tom Rini
2017-01-11 23:45 ` [U-Boot] [PATCH v3 2/4] aspeed: Add basic ast2500 specific drivers and configuration Maxim Sloyko
2017-01-11 23:45 ` [U-Boot] [PATCH v3 3/4] aspeed: Board init functions and common configs for ast2500 based boards Maxim Sloyko
2017-01-13 0:51 ` Tom Rini
2017-01-11 23:45 ` [U-Boot] [PATCH v3 4/4] aspeed: Support for ast2500 Eval Board Maxim Sloyko
2017-01-13 0:51 ` Tom Rini
2017-01-18 21:44 ` [U-Boot] [PATCH v4 0/4] arm: aspeed: Basic support for Aspeed AST2500 part and eval board Maxim Sloyko
2017-01-18 21:44 ` [U-Boot] [PATCH v4 1/4] aspeed: Add drivers common to all Aspeed SoCs Maxim Sloyko
2017-01-26 14:23 ` Simon Glass
2017-01-26 18:31 ` Maxim Sloyko
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-18 21:44 ` [U-Boot] [PATCH v4 2/4] aspeed: Add basic ast2500-specific drivers and configuration Maxim Sloyko
2017-01-26 14:23 ` Simon Glass
2017-01-26 18:02 ` Maxim Sloyko
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-18 21:44 ` [U-Boot] [PATCH v4 3/4] aspeed: Board init functions and common configs for ast2500 based boards Maxim Sloyko
2017-01-26 14:23 ` Simon Glass
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-01-18 21:44 ` [U-Boot] [PATCH v4 4/4] aspeed: Support for ast2500 Eval Board Maxim Sloyko
2017-01-26 14:23 ` Simon Glass
2017-01-28 22:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170104194656.124368-10-maxims@google.com \
--to=maxims@google.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox