From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 13 Jan 2017 21:58:48 -0500 Subject: [U-Boot] [PATCH] defconfig: Add a config for AM335x High Security EVM In-Reply-To: <20170113205736.31920-1-afd@ti.com> References: <20170113205736.31920-1-afd@ti.com> Message-ID: <20170114025848.GD19689@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 13, 2017 at 02:57:36PM -0600, Andrew F. Davis wrote: > Add a new defconfig file for the AM335x High Security EVM. This config > is specific for the case of memory device booting. Memory device booting > is handled separatly from peripheral booting on HS devices as the load > address changes. > > This defconfig is the same as for the non-secure part, except for: > CONFIG_TI_SECURE_DEVICE option set to 'y' > CONFIG_ISW_ENTRY_ADDR updated for secure images. > CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' > CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' > CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size > CONFIG_SPL_SYS_MALLOC_SIMPLE set to 'y' to reduce SPL size > > Signed-off-by: Andrew F. Davis > --- > configs/am335x_hs_evm_defconfig | 62 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 configs/am335x_hs_evm_defconfig This should update the MAINTAINERS file too, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: