[U-Boot] [PATCH] defconfig: Add a config for AM335x High Security EVM

[U-Boot] [PATCH] defconfig: Add a config for AM335x High Security EVM

[Andrew F. Davis]

Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of memory device booting. Memory device booting
is handled separatly from peripheral booting on HS devices as the load
address changes.

This defconfig is the same as for the non-secure part, except for:
	CONFIG_TI_SECURE_DEVICE option set to 'y'
	CONFIG_ISW_ENTRY_ADDR updated for secure images.
	CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
	CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
	CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size
	CONFIG_SPL_SYS_MALLOC_SIMPLE set to 'y' to reduce SPL size

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 configs/am335x_hs_evm_defconfig | 62 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 configs/am335x_hs_evm_defconfig

diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
new file mode 100644
index 0000000000..f8445c3249
--- /dev/null
+++ b/configs/am335x_hs_evm_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_AM33XX=y
+CONFIG_TI_SECURE_DEVICE=y
+# CONFIG_SPL_EXT_SUPPORT is not set
+# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_TARGET_AM335X_EVM=y
+CONFIG_ISW_ENTRY_ADDR=0x40300350
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+# CONFIG_SPL_YMODEM_SUPPORT is not set
+CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_MTD_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"
+# CONFIG_BLK is not set
+CONFIG_DFU_MMC=y
+CONFIG_DFU_NAND=y
+CONFIG_DFU_RAM=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_MMC_OMAP_HS=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_SYS_NS16550=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
+CONFIG_G_DNL_VENDOR_NUM=0x0451
+CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_RSA=y
+CONFIG_SPL_OF_LIBFDT=y
-- 
2.11.0

[U-Boot] [PATCH] defconfig: Add a config for AM335x High Security EVM

[Tom Rini]

On Fri, Jan 13, 2017 at 02:57:36PM -0600, Andrew F. Davis wrote:

> Add a new defconfig file for the AM335x High Security EVM. This config
> is specific for the case of memory device booting. Memory device booting
> is handled separatly from peripheral booting on HS devices as the load
> address changes.
> 
> This defconfig is the same as for the non-secure part, except for:
> 	CONFIG_TI_SECURE_DEVICE option set to 'y'
> 	CONFIG_ISW_ENTRY_ADDR updated for secure images.
> 	CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
> 	CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
> 	CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size
> 	CONFIG_SPL_SYS_MALLOC_SIMPLE set to 'y' to reduce SPL size
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  configs/am335x_hs_evm_defconfig | 62 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 configs/am335x_hs_evm_defconfig

This should update the MAINTAINERS file too, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170113/b40799a3/attachment.sig>