From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 26/26] sunxi: A64: add 32-bit SPL support
Date: Mon, 16 Jan 2017 09:55:23 +0100 [thread overview]
Message-ID: <20170116085523.ten5la63epbbthk2@lukather> (raw)
In-Reply-To: <53551715-c704-c1a9-fb74-9f125ceec0a6@arm.com>
On Fri, Jan 13, 2017 at 09:42:28AM +0000, Andre Przywara wrote:
> > Re wanting to build SPL either as 32-bit or 64-bit, could this be a
> > Kconfig option perhaps?
>
> Sounds like a direction worth to investigate.
> In the moment we have two separate defconfig files, because CPU_V7 and
> ARM64 are actually mutually exclusive, which is really a pain and the
> main reason that part wasn't merged.
I really like that option.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170116/f879ca29/attachment.sig>
next prev parent reply other threads:[~2017-01-16 8:55 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-02 11:48 [U-Boot] [PATCH v4 00/26] sunxi: Allwinner A64: SPL support Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 01/26] sun6i: Restrict some register initialization to Allwinner A31 SoC Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 02/26] armv8: prevent using THUMB Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 03/26] armv8: add lowlevel_init.S Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 04/26] SPL: tiny-printf: add "l" modifier Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 05/26] SPL: tiny-printf: ignore "-" modifier Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 06/26] move UL() macro from armv8/mmu.h into common.h Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 07/26] SPL: make struct spl_image 64-bit safe Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 08/26] armv8: add simple sdelay implementation Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 09/26] armv8: move reset branch into boot hook Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 10/26] ARM: boot0 hook: remove macro, include whole header file Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 11/26] sunxi: introduce extra config option for boot0 header Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 12/26] sunxi: A64: do an RMR switch if started in AArch32 mode Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 13/26] sunxi: provide default DRAM config for sun50i in Kconfig Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 14/26] sunxi: H3: Rework MBUS priority setup Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 15/26] sunxi: H3: add and rename some DRAM contoller registers Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 16/26] sunxi: H3: add DRAM controller single bit delay support Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 17/26] sunxi: clocks: Use the correct pattern register for PLL11 Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 18/26] sunxi: A64: use H3 DRAM initialization code for A64 as well Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 19/26] sunxi: H3/A64: fix non-ODT setting Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 20/26] sunxi: DRAM: fix H3 DRAM size display on aarch64 Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 21/26] sunxi: A64: enable SPL Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 22/26] SPL: read and store arch property from U-Boot image Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 23/26] Makefile: use "arm64" architecture for U-Boot image files Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 24/26] ARM: SPL/FIT: differentiate between arm and arm64 arch properties Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 25/26] sunxi: introduce RMR switch to enter payloads in 64-bit mode Andre Przywara
2017-01-02 11:48 ` [U-Boot] [PATCH v4 26/26] sunxi: A64: add 32-bit SPL support Andre Przywara
2017-01-13 2:19 ` Simon Glass
2017-01-13 9:42 ` Andre Przywara
2017-01-16 8:55 ` Maxime Ripard [this message]
2017-01-16 9:47 ` André Przywara
2017-01-16 13:41 ` Maxime Ripard
2017-01-03 2:38 ` [U-Boot] [linux-sunxi] [PATCH v4 00/26] sunxi: Allwinner A64: " jonsmirl at gmail.com
2017-01-03 10:41 ` Jagan Teki
2017-01-03 13:52 ` jonsmirl at gmail.com
2017-01-04 10:28 ` Jagan Teki
2017-01-04 11:25 ` Chen-Yu Tsai
2017-01-04 13:36 ` André Przywara
2017-01-04 16:40 ` jonsmirl at gmail.com
2017-01-04 17:29 ` André Przywara
2017-01-04 19:00 ` jonsmirl at gmail.com
2017-01-04 22:36 ` André Przywara
2017-01-04 22:59 ` jonsmirl at gmail.com
2017-01-04 23:41 ` André Przywara
2017-06-15 6:48 ` BongHo Lee
2017-01-04 19:03 ` jonsmirl at gmail.com
2017-01-04 15:50 ` [U-Boot] " Jagan Teki
2017-08-11 11:29 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170116085523.ten5la63epbbthk2@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox