[U-Boot] [PATCH 2/3] ARM: am335x: Add support for chiliSOM

[Tom Rini <trini@konsulko.com>]

On Mon, Jan 23, 2017 at 05:27:09PM +0100, Marcin Niestroj wrote:
> Hi,
> Thanks for review! See my comment below.
> 
> On 23.01.2017 16:56, Tom Rini wrote:
> >On Mon, Jan 23, 2017 at 02:39:15PM +0100, Marcin Niestroj wrote:
> >
> >>chiliSOM is a System On Module (http://http://grinn-global.com/chilisom/).
> >>It can't exists on its own, but will be used as part of other boards.
> >>
> >>Hardware specification:
> >> * TI AM335x processor
> >> * 128M, 256M or 512M DDR3 memory
> >> * up to 256M NAND
> >>
> >>Here we treat SOM similar to SOC, so we place it inside arch/arm/mach-*
> >>directory and make it possible to reuse initialization code (i.e. DDR,
> >>NAND init) for all boards that use it. This approach is similar as for
> >>liteSOM module.
> >>
> >>Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
> >>---
> >> arch/arm/Kconfig                               |   2 +
> >> arch/arm/Makefile                              |   1 +
> >> arch/arm/mach-chilisom/Kconfig                 |   4 +
> >> arch/arm/mach-chilisom/Makefile                |   6 +
> >> arch/arm/mach-chilisom/chilisom.c              | 185 +++++++++++++++++++++++++
> >> arch/arm/mach-chilisom/include/mach/chilisom.h |  15 ++
> >> 6 files changed, 213 insertions(+)
> >
> >These don't belong in a new mach directory, this should end up in
> >board/grinn/common/ instead, thanks!
> >
> 
> This will work for all grinn boards. But the idea is that some other
> vendor can make a board that will use chilisom as it's base. And in
> that case sources from board/grinn/common/ directory won't compile.
> Do you have any idea how to bypass this restriction?

Good question.  I think the full answer here is that oops,
arch/arm/mach-litesom shouldn't have been ACK'd as other SoMs (say
board/solidrun/mx6cuboxi/) just keep everything central to the board
directory and expect that derivations will just copy the directory and
edit in-place.  That said, that is indeed not optimal, especially since
you've already done the leg-work to split things for SoM and carrier.
Perhaps arch/arm/mach-omap2/am33xx/chilisom.c (depends on
CONFIG_AM33XX_CHILISOM, which gets select'd by the boards in question).
And then a similar change for mach-litesom into arch/arm/cpu/armv7/mx6/
(which will get moved to arch/arm/mach-imx at some point I believe).
Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170123/8e7d5ce1/attachment.sig>