From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 26 Jan 2017 12:41:31 -0500 Subject: [U-Boot] [PATCH 4/7] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet In-Reply-To: <1485436049-19754-5-git-send-email-rogerq@ti.com> References: <1485436049-19754-1-git-send-email-rogerq@ti.com> <1485436049-19754-5-git-send-email-rogerq@ti.com> Message-ID: <20170126174131.GA22316@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jan 26, 2017 at 03:07:26PM +0200, Roger Quadros wrote: > Use the same convention that was used for ICSS1 Ethernet > - If pin is output, set as PIN_OUTPUT > - If pin is input and external pull resistor present set as PIN_INPUT > - If pin is input and external pull resistor absent, set pull to same > as that of the external PHY's internall pull. > > Signed-off-by: Roger Quadros Reviewed-by: Tom Rini -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: