* [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-03-03 4:52 ` Simon Glass
2017-02-23 17:54 ` [U-Boot] [PATCH 2/9] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Andrew F. Davis
` (7 subsequent siblings)
8 siblings, 1 reply; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
The function 'board_fit_image_post_process' is defined only when the
config option CONFIG_FIT_IMAGE_POST_PROCESS is enabled. For secure
systems that do not use SPL but do use FIT kernel images, only
CONFIG_FIT_IMAGE_POST_PROCESS will be defined, which will result in an
implicit declaration of function 'board_fit_image_post_process' warning
while building u-boot. Fix this warning.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
include/image.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/image.h b/include/image.h
index 1e686b76d3..24cdd8cd14 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1257,7 +1257,8 @@ void android_print_contents(const struct andr_img_hdr *hdr);
*/
int board_fit_config_name_match(const char *name);
-#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
+#if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \
+ defined(CONFIG_FIT_IMAGE_POST_PROCESS)
/**
* board_fit_image_post_process() - Do any post-process on FIT binary data
*
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS
2017-02-23 17:54 ` [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Andrew F. Davis
@ 2017-03-03 4:52 ` Simon Glass
0 siblings, 0 replies; 11+ messages in thread
From: Simon Glass @ 2017-03-03 4:52 UTC (permalink / raw)
To: u-boot
On 23 February 2017 at 10:54, Andrew F. Davis <afd@ti.com> wrote:
> The function 'board_fit_image_post_process' is defined only when the
> config option CONFIG_FIT_IMAGE_POST_PROCESS is enabled. For secure
> systems that do not use SPL but do use FIT kernel images, only
> CONFIG_FIT_IMAGE_POST_PROCESS will be defined, which will result in an
> implicit declaration of function 'board_fit_image_post_process' warning
> while building u-boot. Fix this warning.
>
> Signed-off-by: Madan Srinivas <madans@ti.com>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> ---
> include/image.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Acked-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 2/9] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 3/9] arm: mach-omap2: Enable Kconfig support for K2 HS devices Andrew F. Davis
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
This commit implements the board_fit_image_post_process() function for
the keystone architecture. This function calls into the secure boot
monitor for secure authentication/decryption of the image. All needed
work is handled by the boot monitor and, depending on the keystone
platform, the security functions may be offloaded to other secure
processing elements in the SoC.
The boot monitor acts as the gateway to these secure functions and the
boot monitor for secure devices is available as part of the SECDEV
package for KS2. For more details refer doc/README.ti-secure
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/mach-keystone/mon.c | 73 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c
index 256f6300ed..81009848d0 100644
--- a/arch/arm/mach-keystone/mon.c
+++ b/arch/arm/mach-keystone/mon.c
@@ -10,6 +10,7 @@
#include <common.h>
#include <command.h>
#include <mach/mon.h>
+#include <spl.h>
asm(".arch_extension sec\n\t");
int mon_install(u32 addr, u32 dpsc, u32 freq)
@@ -61,3 +62,75 @@ int mon_power_off(int core_id)
: "cc", "r0", "r1", "memory");
return result;
}
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+#define KS2_HS_SEC_HEADER_LEN 0x60
+#define KS2_HS_SEC_TAG_OFFSET 0x34
+#define KS2_AUTH_CMD 130
+
+/**
+ * k2_hs_bm_auth() - Invokes security functions using a
+ * proprietary TI interface. This binary and source for
+ * this is available in the secure development package or
+ * SECDEV. For details on how to access this please refer
+ * doc/README.ti-secure
+ *
+ * @cmd: Secure monitor command
+ * @arg1: Argument for command
+ *
+ * returns non-zero value on success, zero on error
+ */
+static int k2_hs_bm_auth(int cmd, void *arg1)
+{
+ int result;
+
+ asm volatile (
+ "stmfd r13!, {r4-r12, lr}\n"
+ "mov r0, %1\n"
+ "mov r1, %2\n"
+ "smc #2\n"
+ "ldmfd r13!, {r4-r12, lr}\n"
+ : "=&r" (result)
+ : "r" (cmd), "r" (arg1)
+ : "cc", "r0", "r1", "memory");
+
+ return result;
+}
+
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+ int result = 0;
+ void *image = *p_image;
+
+ if (strncmp(image + KS2_HS_SEC_TAG_OFFSET, "KEYS", 4)) {
+ printf("No signature found in image!\n");
+ hang();
+ }
+
+ result = k2_hs_bm_auth(KS2_AUTH_CMD, image);
+ if (result == 0) {
+ printf("Authentication failed!\n");
+ hang();
+ }
+
+ /*
+ * Overwrite the image headers after authentication
+ * and decryption. Update size to reflect removal
+ * of header.
+ */
+ memcpy(image, image + KS2_HS_SEC_HEADER_LEN, *p_size);
+ *p_size -= KS2_HS_SEC_HEADER_LEN;
+
+ /*
+ * Output notification of successful authentication to re-assure the
+ * user that the secure code is being processed as expected. However
+ * suppress any such log output in case of building for SPL and booting
+ * via YMODEM. This is done to avoid disturbing the YMODEM serial
+ * protocol transactions.
+ */
+ if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
+ IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
+ spl_boot_device() == BOOT_DEVICE_UART))
+ printf("Authentication passed\n");
+}
+#endif
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 3/9] arm: mach-omap2: Enable Kconfig support for K2 HS devices
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 1/9] image: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 2/9] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone Andrew F. Davis
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
Like the OMAP54xx, AM43xx, & AM33xx family SoCs, the keystone family
of SoCs also have high security enabled models. Allow K2E devices to
be built with HS Device Type Support.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/mach-omap2/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 24bc485195..d74b068abc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,6 +1,6 @@
config TI_SECURE_DEVICE
bool "HS Device Type Support"
- depends on OMAP54XX || AM43XX || AM33XX
+ depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE
help
If a high secure (HS) device type is being used, this config
must be set. This option impacts various aspects of the
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (2 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 3/9] arm: mach-omap2: Enable Kconfig support for K2 HS devices Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 5/9] ARM: Keystone2: Build secure images for K2 Andrew F. Davis
` (4 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image
name for secure K2 devices, for all boot modes other than SPI flash.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/mach-omap2/config_secure.mk | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
index 0c843338d7..0346cb93ab 100644
--- a/arch/arm/mach-omap2/config_secure.mk
+++ b/arch/arm/mach-omap2/config_secure.mk
@@ -77,6 +77,12 @@ u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE
u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkomapsecimg)
+# For supporting single stage boot on keystone, the image is a full u-boot
+# file, not an SPL. This will work for all boot devices, other than SPI
+# flash
+u-boot_HS_MLO: $(obj)/u-boot.bin
+ $(call if_changed,mkomapsecimg)
+
# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
# file, not an SPL. In this case the mkomapsecimg command looks for a
# u-boot-HS_* prefix
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 5/9] ARM: Keystone2: Build secure images for K2
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (3 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 6/9] doc: Updates info on using Keystone2 secure devices Andrew F. Davis
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
Adds an additional image type needed for supporting secure keystone
devices. The build generates u-boot_HS_MLO which can be used to boot
from all media on secure keystone devices.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/mach-keystone/config.mk | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-keystone/config.mk b/arch/arm/mach-keystone/config.mk
index 9ae1e9ac91..db556ea0a8 100644
--- a/arch/arm/mach-keystone/config.mk
+++ b/arch/arm/mach-keystone/config.mk
@@ -5,9 +5,15 @@
# SPDX-License-Identifier: GPL-2.0+
#
+include $(srctree)/arch/arm/mach-omap2/config_secure.mk
+
ifndef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ALL-y += u-boot_HS_MLO
+else
ALL-y += MLO
endif
+endif
MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 6/9] doc: Updates info on using Keystone2 secure devices
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (4 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 5/9] ARM: Keystone2: Build secure images for K2 Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 7/9] Kconfig: Adds SYS_TEXT_BASE config option for Keystone2 Andrew F. Davis
` (2 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
Add a section describing the secure boot image used on
Keystone2 secure devices.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
doc/README.ti-secure | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/doc/README.ti-secure b/doc/README.ti-secure
index 9b0fbf9732..4b5380c0f3 100644
--- a/doc/README.ti-secure
+++ b/doc/README.ti-secure
@@ -133,6 +133,26 @@ Booting of U-Boot SPL
u-boot-spl_HS_X-LOADER - boot image for all other flash memories
including QSPI and NOR flash
+ Invoking the script for Keystone2 Secure Devices
+ =============================================
+
+ create-boot-image.sh \
+ <UNUSED> <INPUT_FILE> <OUTPUT_FILE> <UNUSED>
+
+ <UNUSED> is currently ignored and reserved for future use.
+
+ <INPUT_FILE> is the full path and filename of the public world boot
+ loader binary file (only u-boot.bin is currently supported on
+ Keystone2 devices, u-boot-spl.bin is not currently supported).
+
+ <OUTPUT_FILE> is the full path and filename of the final secure image.
+ The output binary images should be used in place of the standard
+ non-secure binary images (see the platform-specific user's guides
+ and releases notes for how the non-secure images are typically used)
+ u-boot_HS_MLO - signed and encrypted boot image that can be used to
+ boot from all media. Secure boot from SPI NOR flash is not
+ currently supported.
+
Booting of Primary U-Boot (u-boot.img)
======================================
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 7/9] Kconfig: Adds SYS_TEXT_BASE config option for Keystone2
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (5 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 6/9] doc: Updates info on using Keystone2 secure devices Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 8/9] defconfig: k2e_hs_evm: Add k2e_hs_evm_defconfig Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 9/9] defconfig: k2hk_hs_evm: Add k2hk_hs_evm_defconfig Andrew F. Davis
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
This patch makes SYS_TEXT_BASE a config option for Keystone2
so that it can be used to load u-boot at different addresses
on secure and non-secure Keystone2 devices.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
Kconfig | 2 +-
configs/k2e_evm_defconfig | 1 +
configs/k2g_evm_defconfig | 1 +
configs/k2hk_evm_defconfig | 1 +
configs/k2l_evm_defconfig | 1 +
5 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index 81b4226463..1a5b105daa 100644
--- a/Kconfig
+++ b/Kconfig
@@ -285,7 +285,7 @@ config SYS_EXTRA_OPTIONS
config SYS_TEXT_BASE
depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
(M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
- ARCH_ZYNQ
+ ARCH_ZYNQ || ARCH_KEYSTONE
depends on !EFI_APP
hex "Text Base"
help
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index a42a485e2b..95259661c9 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_TEXT_BASE=0x0c000000
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index f3ee01afb1..84b5152e80 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_TEXT_BASE=0x0c000000
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index d924796627..87fe2f437a 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_TEXT_BASE=0x0c000000
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index c81758571c..9226488409 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_TEXT_BASE=0x0c000000
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 8/9] defconfig: k2e_hs_evm: Add k2e_hs_evm_defconfig
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (6 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 7/9] Kconfig: Adds SYS_TEXT_BASE config option for Keystone2 Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
2017-02-23 17:54 ` [U-Boot] [PATCH 9/9] defconfig: k2hk_hs_evm: Add k2hk_hs_evm_defconfig Andrew F. Davis
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
TI K2E secure devices have to be built with TI_SECURE_DEVICE, FIT, and
FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
configs/k2e_hs_evm_defconfig | 51 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 configs/k2e_hs_evm_defconfig
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
new file mode 100644
index 0000000000..d515cedaca
--- /dev/null
+++ b/configs/k2e_hs_evm_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_SYS_TEXT_BASE=0x0c000060
+CONFIG_TARGET_K2E_EVM=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm"
+CONFIG_FIT=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="K2E HS EVM # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_TI_AEMIF=y
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [U-Boot] [PATCH 9/9] defconfig: k2hk_hs_evm: Add k2hk_hs_evm_defconfig
2017-02-23 17:54 [U-Boot] [PATCH 0/9] Add support for secure boot on Keystone2 SoCs Andrew F. Davis
` (7 preceding siblings ...)
2017-02-23 17:54 ` [U-Boot] [PATCH 8/9] defconfig: k2e_hs_evm: Add k2e_hs_evm_defconfig Andrew F. Davis
@ 2017-02-23 17:54 ` Andrew F. Davis
8 siblings, 0 replies; 11+ messages in thread
From: Andrew F. Davis @ 2017-02-23 17:54 UTC (permalink / raw)
To: u-boot
TI K2HK secure devices have to be built with TI_SECURE_DEVICE, FIT, and
FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
configs/k2hk_hs_evm_defconfig | 51 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 configs/k2hk_hs_evm_defconfig
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig
new file mode 100644
index 0000000000..9fe91ea19c
--- /dev/null
+++ b/configs/k2hk_hs_evm_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_SYS_TEXT_BASE=0x0c000060
+CONFIG_TARGET_K2HK_EVM=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
+CONFIG_FIT=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="K2HK EVM # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_TI_AEMIF=y
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread