From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew F. Davis Date: Fri, 24 Feb 2017 06:59:41 -0600 Subject: [U-Boot] [RESEND PATCH 4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone In-Reply-To: <20170224125946.7500-1-afd@ti.com> References: <20170224125946.7500-1-afd@ti.com> Message-ID: <20170224125946.7500-5-afd@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Madan Srinivas As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image name for secure K2 devices, for all boot modes other than SPI flash. Signed-off-by: Madan Srinivas Signed-off-by: Andrew F. Davis --- arch/arm/mach-omap2/config_secure.mk | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 0c843338d7..0346cb93ab 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -77,6 +77,12 @@ u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE $(call if_changed,mkomapsecimg) +# For supporting single stage boot on keystone, the image is a full u-boot +# file, not an SPL. This will work for all boot devices, other than SPI +# flash +u-boot_HS_MLO: $(obj)/u-boot.bin + $(call if_changed,mkomapsecimg) + # For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot # file, not an SPL. In this case the mkomapsecimg command looks for a # u-boot-HS_* prefix -- 2.11.0