[U-Boot] Ethernet not detecting on Odroid u3

[Siarhei Siamashka <siarhei.siamashka@gmail.com>]

On Tue, 14 Mar 2017 14:44:26 +0530
Anand Moon <linux.amoon@gmail.com> wrote:

> Hi Siarhei/Jaehoon
> 
> On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> > On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:  
> >> On Mon, 6 Mar 2017 12:18:50 +0200
> >> Siarhei Siamashka <siarhei.siamashka@gmail.com> wrote:
> >>  
> >>> On Thu, 12 Jan 2017 14:02:48 +0530
> >>> Anand Moon <linux.amoon@gmail.com> wrote:
> >>>  
> >>>> Hi All,
> >>>>
> >>>> I tried to compile the latest u-boot for Odroid U3.
> >>>> issue is that Ethernet is not able to detected.
> >>>>
> >>>> Please let me know what need to enable USB Ethernet
> >>>> to support tftp boot.
> >>>>
> >>>> Best Regards
> >>>> -Anand
> >>>>
> >>>> ------
> >>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
> >>>>
> >>>> CPU:   Exynos4412 @ 1 GHz
> >>>> Model: Odroid based on Exynos4412
> >>>> Board: Odroid based on Exynos4412
> >>>> Type:  u3
> >>>> DRAM:  2 GiB
> >>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> >>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> >>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
> >>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> >>>> *** Warning - bad CRC, using default environment
> >>>>
> >>>> Net:   No ethernet found.
> >>>> Hit any key to stop autoboot:  0
> >>>> Odroid #
> >>>> Odroid #
> >>>> Odroid # usb start
> >>>> starting USB...
> >>>> USB0:   USB EHCI 1.00
> >>>> scanning bus 0 for devices... 1 USB Device(s) found
> >>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> >>>> Odroid #
> >>>> Odroid #
> >>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
> >>>> Odroid # usb start
> >>>> Odroid # usb info
> >>>> 1: Hub,  USB Revision 2.0
> >>>>  - u-boot EHCI Host Controller
> >>>>  - Class: Hub
> >>>>  - PacketSize: 64  Configurations: 1
> >>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
> >>>>    Configuration: 1
> >>>>    - Interfaces: 1 Self Powered 0mA
> >>>>      Interface: 0
> >>>>      - Alternate Setting 0, Endpoints: 1
> >>>>      - Class Hub
> >>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> >>>>
> >>>> Odroid # reset  
> >>>
> >>> Hi Anand,
> >>>
> >>> It's an old problem and we have identified its root cause a long
> >>> time ago:
> >>>
> >>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
> >>>
> >>> Basically, a voltage regulator is not getting initialized because
> >>> a call to the board_usb_init() function was lost during the DM
> >>> conversion. You can try to compile U-Boot from my branch, it contains
> >>> the rebased fixes which I have been using all this time on my ODROID-X
> >>> board:
> >>>
> >>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
> >>>
> >>> I did all the initial investigation back in 2015, but tried to
> >>> delegate the actual bugfixing work to the ODROID board maintainer(s).
> >>> Apparently it did not fly and ODROID support is still broken.
> >>>
> >>> If you can test my branch and confirm that it works on your ODROID-U3,
> >>> then I can maybe spend some time on making cleaner patches and ensuring
> >>> that they reach the U-Boot git repository.
> >>>
> >>> Thanks!  
> >>
> >> Hello again,
> >>
> >> Anand Moon, considering no reply to my post, do I understand it
> >> right that you are actually not very much interested in getting
> >> this particular problem resolved in U-Boot?
> >>
> >> These ODROID problems are relatively simple and don't require any
> >> special skills or considerable efforts to resolve. The only issue
> >> is that apparently almost nobody uses the mainline U-Boot on this
> >> hardware and nobody gives rats about having it usable out of the
> >> box.
> >>
> >> I only have an ODROID-X board, which is a rather early and
> >> short-lived revision. Again, if you or anybody else could step in
> >> and take care of testing the fixes on other ODROID boards (X2 and
> >> U3), then we could get ODROID boards working properly in the next
> >> U-Boot release.
> >>
> >>
> >> Jaehoon Chung, you seem to be listed as the current nominal ODROID
> >> boards maintainer. But you don't seem to be doing anything other
> >> than just making promises to check various things and then
> >> disappearing for months/years:  
> >
> > Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
> > And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
> >
> > Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
> > If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
> > You're regarding to me like nothing to do...  
> >>
> >>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
> >>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html  
> >
> > I can't access this URL,,so i don't know what you added..
> >  
> >>
> >> Could you please explain what's going on and what are your plans
> >> regarding ODROID boards support in U-Boot?  
> >
> > I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
> > Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
> > You can see my patches for goni, universal210, trats..
> >
> > I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
> > I keep going my current task..
> >
> > Best Regards,
> > Jaehoon Chung
> >  
> 
> I might have missed early email. I would like help resolve this issue
> and investigate on the inputs you have shared.

You can just clone my git branch:

   git clone -b 20170306-unbreak-odroid https://github.com/ssvb/u-boot.git

Then compile it and try to boot on your ODROID-U3 board. Check if it
boots and if the Ethernet is working properly. And finally report
the results. If it works, then I will send cleaned up versions of
these patches to the U-Boot mailing list.

Thanks!

-- 
Best regards,
Siarhei Siamashka