[U-Boot] [PATCH 13/17] aspeed: Add support for Clocks needed by MACs

[Tom Rini <trini@konsulko.com>]

On Mon, Mar 20, 2017 at 10:24:20AM -0700, Maxim Sloyko wrote:
> On Sun, Mar 19, 2017 at 9:42 AM, Tom Rini <trini@konsulko.com> wrote:
> 
> > On Thu, Mar 16, 2017 at 02:36:20PM -0700, Maxim Sloyko wrote:
> > > Add support for clocks needed by MACs to ast2500 clock driver.
> > > The clocks are D2-PLL, which is used by both MACs and PCLK_MAC1 and
> > > PCLK_MAC2 for MAC1 and MAC2 respectively.
> > >
> > > The rate of D2-PLL is hardcoded to 250MHz -- the value used in Aspeed
> > > SDK. It is not entirely clear from the datasheet how this clock is used
> > > by MACs, so not clear if the rate would ever need to be different. So,
> > > for now, hardcoding it is probably safer.
> > >
> > > The rate of PCLK_MAC{1,2} is chosen based on MAC speed selected through
> > > hardware strapping.
> > >
> > > So, the network driver would only need to enable these clocks, no need
> > > to configure the rate.
> > >
> > > Signed-off-by: Maxim Sloyko <maxims@google.com>
> > > ---
> > >
> > >  arch/arm/dts/ast2500-u-boot.dtsi               |   8 +
> > >  arch/arm/include/asm/arch-aspeed/scu_ast2500.h |  62 +++++-
> > >  drivers/clk/aspeed/clk_ast2500.c               | 265
> > ++++++++++++++++++++++---
> > >  include/dt-bindings/clock/ast2500-scu.h        |   2 +
> > >  4 files changed, 304 insertions(+), 33 deletions(-)
> > >
> > > diff --git a/arch/arm/dts/ast2500-u-boot.dtsi
> > b/arch/arm/dts/ast2500-u-boot.dtsi
> > > index faeeec1be4..f826646095 100644
> > > --- a/arch/arm/dts/ast2500-u-boot.dtsi
> > > +++ b/arch/arm/dts/ast2500-u-boot.dtsi
> > > @@ -61,3 +61,11 @@
> > >               };
> > >       };
> > >  };
> > > +
> > > +&mac0 {
> > > +     clocks = <&scu PCLK_MAC1>, <&scu PLL_D2PLL>;
> > > +};
> > > +
> > > +&mac1 {
> > > +     clocks = <&scu PCLK_MAC2>, <&scu PLL_D2PLL>;
> > > +};
> >
> > Why is this here and not in the main dts file?  The -u-boot.dtsi is for
> > stuff that's not appropriate in the upstream dts file.  Thanks!
> 
> There is no clock driver for this part in mainline Linux Kernel yet and I
> don't know how it will end up being configured. I suspect that they might
> not use the same bindings though.
> 
> Should I put this into board specific dts?

So this applies to a lot of parts of the series here.  What we don't
want to do is have places where the DTS here diverges from the Linux
kernel DTS and we don't reconcile them.  If the relevant Linux drivers
are not in mainline, are they at least in linux-next or otherwise
submitted to the relevant subtrees?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170320/9be4af01/attachment.sig>