From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 6 Apr 2017 11:57:27 +0200 Subject: [U-Boot] [PATCH 1/5] davinci: omapl138_lcdk: remove spiboot In-Reply-To: <20170406092257.15541-2-nsekhar@ti.com> References: <20170406092257.15541-1-nsekhar@ti.com> <20170406092257.15541-2-nsekhar@ti.com> Message-ID: <20170406115727.3528db47@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 6 Apr 2017 14:52:53 +0530 Sekhar Nori wrote: > OMAP-L138 LCDK board does not have a SPI flash. > Remove spiboot related environment variable > definitions. > > Signed-off-by: Sekhar Nori > --- > include/configs/omapl138_lcdk.h | 10 ++-------- > 1 file changed, 2 insertions(+), 8 deletions(-) > > diff --git a/include/configs/omapl138_lcdk.h > b/include/configs/omapl138_lcdk.h index 6700073aa203..f6aca0482527 > 100644 --- a/include/configs/omapl138_lcdk.h > +++ b/include/configs/omapl138_lcdk.h > @@ -264,9 +264,7 @@ > #define CONFIG_BOOTARGS "console=ttyS2,115200n8 > root=/dev/mmcblk0p2 rw rootwait ip=off" #define CONFIG_BOOTCOMMAND \ > "if mmc rescan; then " \ > - "run mmcboot; " \ > - "else " \ > - "run spiboot; " \ > + "run mmcboot; " > "fi" > #define CONFIG_EXTRA_ENV_SETTINGS \ > "fdtaddr=0xc0600000\0" \ > @@ -280,11 +278,7 @@ > __stringify(CONFIG_BOOTFILE) "; " \ > "fatload mmc 0 ${fdtaddr} ${fdtfile}; " \ > "run fdtboot; " \ > - "fi;\0" \ > - "spiboot=" \ > - "sf probe 0; " \ > - "sf read 0xc0700000 0x80000 0x220000; " \ > - "bootz 0xc0700000;\0" > + "fi;\0" > > /* > * U-Boot commands Reviewed-by: Lukasz Majewski Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de