From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lukasz Majewski <lukma@denx.de>
Date: Thu, 6 Apr 2017 12:06:56 +0200
Subject: [U-Boot] [PATCH 5/5] davinci: omapl138_lcdk: switch to using
 common mmc args
In-Reply-To: <20170406092257.15541-6-nsekhar@ti.com>
References: <20170406092257.15541-1-nsekhar@ti.com>
 <20170406092257.15541-6-nsekhar@ti.com>
Message-ID: <20170406120656.08ca60c9@jawa>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thu, 6 Apr 2017 14:52:57 +0530
Sekhar Nori <nsekhar@ti.com> wrote:

> Now that we have common MMC/SD boot environment
> variables that can be used across TI platforms,
> switch OMAP-L138 LCDK to use them.
> 
> As a nice side-effect, we get support for using
> uEnv.txt on this platform.
> 
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
>  include/configs/omapl138_lcdk.h | 23 ++++++++++-------------
>  1 file changed, 10 insertions(+), 13 deletions(-)
> 
> diff --git a/include/configs/omapl138_lcdk.h
> b/include/configs/omapl138_lcdk.h index 599fd5b7a874..e70760402b43
> 100644 --- a/include/configs/omapl138_lcdk.h
> +++ b/include/configs/omapl138_lcdk.h
> @@ -261,30 +261,27 @@
>  #define CONFIG_CMDLINE_TAG
>  #define CONFIG_REVISION_TAG
>  #define CONFIG_SETUP_MEMORY_TAGS
> -#define CONFIG_BOOTARGS		"console=ttyS2,115200n8
> root=/dev/mmcblk0p2 rw rootwait ip=off" #define CONFIG_BOOTCOMMAND \
> -	"if mmc rescan; then " \
> +		"run envboot; " \
>  		"run mmcboot; "
> -	"fi"
>  
>  #define DEFAULT_LINUX_BOOT_ENV \
>  	"loadaddr=0xc0700000\0" \
>  	"fdtaddr=0xc0600000\0" \
>  	"scriptaddr=0xc0600000\0"
>  
> +#include <environment/ti/mmc.h>
> +
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	DEFAULT_LINUX_BOOT_ENV \
> +	DEFAULT_MMC_TI_ARGS \
> +	"bootpart=0:2\0" \
> +	"bootdir=/boot\0" \
> +	"bootfile=zImage\0" \
>  	"fdtfile=da850-lcdk.dtb\0" \
> -	"fdtboot=bootz ${loadaddr} - ${fdtaddr};\0" \
> -	"mmcboot=" \
> -		"if fatload mmc 0 ${scriptaddr} boot.scr; then " \
> -			"source ${scriptaddr}; " \
> -		"else " \
> -			"fatload mmc 0 ${loadaddr} " \
> -				__stringify(CONFIG_BOOTFILE) "; " \
> -			"fatload mmc 0 ${fdtaddr} ${fdtfile}; " \
> -			"run fdtboot; " \
> -		"fi;\0"
> +	"boot_fdt=yes\0" \
> +	"boot_fit=0\0" \
> +	"console=ttyS2,115200n8\0"
>  
>  /*
>   * U-Boot commands

Reviewed-by: Lukasz Majewski <lukma@denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de