From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot PATCH V2 8/9] rockchip: config: enable rockusb support on rk3288 based board
Date: Thu, 20 Apr 2017 00:29:29 +0200 [thread overview]
Message-ID: <20170420002929.2bbdf8d1@jawa> (raw)
In-Reply-To: <20170416155414.14746-9-eddie.cai.linux@gmail.com>
Hi Eddie,
> all rk3288 based boards support rockusb, so enable it
>
> Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
> ---
> configs/evb-rk3288_defconfig | 2 ++
> configs/fennec-rk3288_defconfig | 1 +
> configs/firefly-rk3288_defconfig | 1 +
> configs/miqi-rk3288_defconfig | 1 +
> configs/popmetal-rk3288_defconfig | 1 +
> configs/rock2_defconfig | 2 ++
> configs/sandbox_defconfig | 1 +
> configs/tinker-rk3288_defconfig | 1 +
> 8 files changed, 10 insertions(+)
>
> diff --git a/configs/evb-rk3288_defconfig
> b/configs/evb-rk3288_defconfig index aad2533..6be46fb 100644
> --- a/configs/evb-rk3288_defconfig
> +++ b/configs/evb-rk3288_defconfig
> @@ -17,6 +17,8 @@ CONFIG_CMD_MMC=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/fennec-rk3288_defconfig
> b/configs/fennec-rk3288_defconfig index d1b0ffc..ba8a356 100644
> --- a/configs/fennec-rk3288_defconfig
> +++ b/configs/fennec-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/firefly-rk3288_defconfig
> b/configs/firefly-rk3288_defconfig index b0741d7..c860c06 100644
> --- a/configs/firefly-rk3288_defconfig
> +++ b/configs/firefly-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/miqi-rk3288_defconfig
> b/configs/miqi-rk3288_defconfig index 203824b..3c42d99 100644
> --- a/configs/miqi-rk3288_defconfig
> +++ b/configs/miqi-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/popmetal-rk3288_defconfig
> b/configs/popmetal-rk3288_defconfig index dfc84b9..ddf6062 100644
> --- a/configs/popmetal-rk3288_defconfig
> +++ b/configs/popmetal-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
> index e9a32a9..365bc90 100644
> --- a/configs/rock2_defconfig
> +++ b/configs/rock2_defconfig
> @@ -16,6 +16,8 @@ CONFIG_CMD_MMC=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 7f3f5ac..9350d51 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -33,6 +33,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_REMOTEPROC=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_TFTPPUT=y
> diff --git a/configs/tinker-rk3288_defconfig
> b/configs/tinker-rk3288_defconfig index cec3938..d96d7d3 100644
> --- a/configs/tinker-rk3288_defconfig
> +++ b/configs/tinker-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
This patch would need to be adjusted if mentioned earlier changes are
applied.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
next prev parent reply other threads:[~2017-04-19 22:29 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-16 15:54 [U-Boot] [U-Boot PATCH V2 0/9] introduce Rockchip rockusb Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 1/9] usb: ums: split macro and data struct in storage_common.c Eddie Cai
2017-04-19 15:19 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 2/9] usb: ums: split macro and data struct in f_mass_storage.c Eddie Cai
2017-04-19 15:20 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 3/9] usb: ums: merge storage_common.c into f_mass_storage.c Eddie Cai
2017-04-19 15:21 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 4/9] usb: ums: remove static declaration of some ums functions Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 5/9] usb: ums: add functions to set and get usb interface descriptor Eddie Cai
2017-04-19 15:29 ` Lukasz Majewski
2017-04-20 0:55 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 6/9] usb: ums: add do_extra_command Eddie Cai
2017-04-19 22:14 ` Lukasz Majewski
2017-04-20 1:03 ` Eddie Cai
2017-04-20 8:55 ` Lukasz Majewski
2017-04-20 9:14 ` Lukasz Majewski
2017-04-20 9:16 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 7/9] cmd: add rockusb command Eddie Cai
2017-04-19 22:27 ` Lukasz Majewski
2017-04-20 1:15 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 8/9] rockchip: config: enable rockusb support on rk3288 based board Eddie Cai
2017-04-19 22:29 ` Lukasz Majewski [this message]
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 9/9] rockusb: add a simple readme Eddie Cai
2017-04-19 22:39 ` Lukasz Majewski
2017-04-20 1:43 ` Eddie Cai
2017-04-16 19:34 ` [U-Boot] [U-Boot PATCH V2 0/9] introduce Rockchip rockusb Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170420002929.2bbdf8d1@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox