From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: dts: am335x: disable mmc3
Date: Wed, 17 May 2017 13:46:48 -0400 [thread overview]
Message-ID: <20170517174648.GY5701@bill-the-cat> (raw)
In-Reply-To: <4c7606d1-56f9-0860-9c38-87e21bf571ae@ti.com>
On Wed, May 17, 2017 at 06:14:53PM +0200, Jean-Jacques Hiblot wrote:
>
>
> On 17/05/2017 18:01, Tom Rini wrote:
> >On Wed, May 17, 2017 at 04:46:29PM +0200, Jean-Jacques Hiblot wrote:
> >>
> >>On 17/05/2017 15:04, Tom Rini wrote:
> >>>On Wed, May 17, 2017 at 01:55:56PM +0200, Jean-Jacques Hiblot wrote:
> >>>
> >>>>SDIO is not supported in u-boot, there is no point in enabling mmc3.
> >>>>
> >>>>Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> >>>>---
> >>>>
> >>>>Tom,
> >>>>
> >>>>this will fix the problem youreported with commit b5511d6cb8dc601efc14b8cf60755
> >>>>on am335x-evm. For the record, the problem is that the clock of mmc 3 is not
> >>>>enbled by the arch code. With DM_MMC enabled, mmc3 gets probed and u-boot crashes
> >>>>when mmc3's registers are accessed for the first time.
> >>>>
> >>>>Jean-Jacques
> >>>>
> >>>>
> >>>> arch/arm/dts/am335x-evm.dts | 4 +++-
> >>>> 1 file changed, 3 insertions(+), 1 deletion(-)
> >>>>
> >>>>diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts
> >>>>index a6f20af..e94fcad 100644
> >>>>--- a/arch/arm/dts/am335x-evm.dts
> >>>>+++ b/arch/arm/dts/am335x-evm.dts
> >>>>@@ -721,12 +721,14 @@
> >>>> };
> >>>> &mmc3 {
> >>>>+ /* disable MMC3 as SDIO is not supported in U-Boot */
> >>>>+ status = "disabled";
> >>>>+
> >>>> /* these are on the crossbar and are outlined in the
> >>>> xbar-event-map element */
> >>>> dmas = <&edma 12
> >>>> &edma 13>;
> >>>> dma-names = "tx", "rx";
> >>>>- status = "okay";
> >>>> vmmc-supply = <&wlan_en_reg>;
> >>>> bus-width = <4>;
> >>>> pinctrl-names = "default";
> >>>Please put this into arch/arm/dts/am335x-evm-u-boot.dtsi instead,
> >>I tried and it doesn't work. The XXX-u-boot.dtsi being included at
> >>the beginning of the DTS, it cannot override the
> >>'status = "okay"' present in am335x-evm.dts.
> >OK, I've manually confirmed that
> >https://patchwork.ozlabs.org/patch/763654/ does what I expect (and you
> >were suggesting too), can you please test that with a patch that adds
> >am335x-evm-u-boot.dtsi? Thanks again!
> The dependency on the *-u-boot.dtsi is broken. including is better
> than concatenating in that sense.
> Other than that, it does the job.
Ah, OK, let me do a v2 that keeps depends but doesn't clean up the
Makefile logic really.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170517/d7fdd129/attachment.sig>
prev parent reply other threads:[~2017-05-17 17:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-17 11:55 [U-Boot] [PATCH] ARM: dts: am335x: disable mmc3 Jean-Jacques Hiblot
2017-05-17 13:04 ` Tom Rini
2017-05-17 14:46 ` Jean-Jacques Hiblot
2017-05-17 15:00 ` Tom Rini
2017-05-17 15:09 ` Jean-Jacques Hiblot
2017-05-17 16:01 ` Tom Rini
2017-05-17 16:14 ` Jean-Jacques Hiblot
2017-05-17 17:46 ` Tom Rini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170517174648.GY5701@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox