From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sekhar Nori Date: Fri, 2 Jun 2017 17:54:04 +0530 Subject: [U-Boot] [PATCH 6/7] board: ti: enable support for writing to fat partition In-Reply-To: <20170602122405.18983-1-nsekhar@ti.com> References: <20170602122405.18983-1-nsekhar@ti.com> Message-ID: <20170602122405.18983-7-nsekhar@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Enable support for writing to FAT partitions on TI's boards. Signed-off-by: Sekhar Nori --- board/ti/common/Kconfig | 1 + include/configs/am43xx_evm.h | 1 - include/configs/ti_armv7_common.h | 8 -------- 3 files changed, 1 insertion(+), 9 deletions(-) diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index 1187cf54337f..0517b1dfdf12 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -26,6 +26,7 @@ config TI_COMMON_CMD_OPTIONS imply CMD_EXT4_WRITE imply CMD_FASTBOOT if FASTBOOT imply CMD_FAT + imply FAT_WRITE if CMD_FAT imply CMD_FS_GENERIC imply CMD_GPIO imply CMD_GPT diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 25f63e831142..1d8e39c20352 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -75,7 +75,6 @@ #define FAT_ENV_INTERFACE "mmc" #define FAT_ENV_DEVICE_AND_PART "0:1" #define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0bd3c9f94cfa..5321ed6b0919 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -145,14 +145,6 @@ #define CONFIG_SUPPORT_RAW_INITRD /* - * Common filesystems support. When we have removable storage we - * enabled a number of useful commands and support. - */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) -#define CONFIG_FAT_WRITE -#endif - -/* * Our platforms make use of SPL to initalize the hardware (primarily * memory) enough for full U-Boot to be loaded. We make use of the general * SPL framework found under common/spl/. Given our generally common memory -- 2.9.0