From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/13] driver model bring-up of dwc3 usb peripheral
Date: Tue, 13 Jun 2017 17:39:56 +0530 [thread overview]
Message-ID: <20170613121009.25860-1-vigneshr@ti.com> (raw)
This patch series enables ti dwc3 usb peripherial driver to adopt driver
model and DT. And also adds support for to USB device boot using RNDIS
for AM437x.
Tested on AM437x GP EVM in USB RNDIS boot mode. ROM downloads SPL, SPL
loads U-Boot via usb ether and then U-Boot loads kernel image using the
same interface.
Based on previous work submitted by Mugunthan here:
https://lists.denx.de/pipermail/u-boot/2016-March/250115.html
Change log:
* Reorder patches adding dwc3 driver model patches
* Split patch 8 into 3 patches.
* rebase to latest master and pick up Reviewed-bys
Mugunthan V N (7):
drivers: usb: dwc3: remove devm_zalloc from linux_compact
drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board
files to drivers
am437x: board: do not register usb devices when CONFIG_DM_USB is
defined
omap5/am57xx/dra7xx: board: do not register usb devices when
CONFIG_DM_USB is defined
drivers: usb: common: add support to get maximum speed from dt
drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model
support
drivers: usb: dwc3: add ti dwc3 misc driver for wrapper
Vignesh R (6):
usb: gadget: ether: Provide a way to read MAC address
usb: gadget: ether: Populate DM_FLAG_PRE_RELOC flag
usb: gadget: add DWC3 USB gadget support
am43xx: Add USB device boot support
configs: am43xx: Enable configs to support USB device boot
ARM: am437x-gp-evm-u-boot.dtsi: Enable nodes for USB device boot
arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 20 +++
arch/arm/mach-omap2/boot-common.c | 3 +-
board/ti/am43xx/board.c | 41 +++---
board/ti/am57xx/board.c | 13 +-
board/ti/dra7xx/evm.c | 13 +-
board/ti/omap5_uevm/evm.c | 13 +-
configs/am43xx_evm_defconfig | 13 +-
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
drivers/usb/common/common.c | 29 ++++
drivers/usb/dwc3/core.c | 64 ++++++++-
drivers/usb/dwc3/core.h | 6 +
drivers/usb/dwc3/dwc3-omap.c | 231 +++++++++++++++++++++++++++++-
drivers/usb/dwc3/gadget.c | 2 +-
drivers/usb/dwc3/linux-compat.h | 5 -
drivers/usb/dwc3/ti_usb_phy.c | 1 +
drivers/usb/gadget/ether.c | 8 +-
drivers/usb/gadget/gadget_chips.h | 2 +
include/configs/am43xx_evm.h | 27 ++--
include/linux/usb/otg.h | 9 ++
scripts/Makefile.spl | 1 +
20 files changed, 416 insertions(+), 86 deletions(-)
--
2.13.0
next reply other threads:[~2017-06-13 12:09 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-13 12:09 Vignesh R [this message]
2017-06-13 12:09 ` [U-Boot] [PATCH v2 01/13] drivers: usb: dwc3: remove devm_zalloc from linux_compact Vignesh R
2017-06-13 13:58 ` Marek Vasut
2017-06-14 9:05 ` Vignesh R
2017-06-15 16:55 ` Marek Vasut
2017-06-13 12:09 ` [U-Boot] [PATCH v2 02/13] drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board files to drivers Vignesh R
2017-06-13 12:09 ` [U-Boot] [PATCH v2 03/13] am437x: board: do not register usb devices when CONFIG_DM_USB is defined Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 04/13] omap5/am57xx/dra7xx: " Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 05/13] drivers: usb: common: add support to get maximum speed from dt Vignesh R
2017-06-13 14:01 ` Marek Vasut
2017-06-14 9:16 ` Vignesh R
2017-06-15 17:07 ` Marek Vasut
2017-06-13 12:10 ` [U-Boot] [PATCH v2 06/13] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support Vignesh R
2017-06-13 14:03 ` Marek Vasut
2017-06-14 12:25 ` Vignesh R
2017-06-15 16:57 ` Marek Vasut
2017-06-20 12:00 ` Vignesh R
2017-06-20 12:04 ` Marek Vasut
2017-06-20 13:44 ` Lukasz Majewski
2017-06-21 5:12 ` Vignesh R
2017-06-21 8:09 ` Lukasz Majewski
2017-06-22 12:12 ` Vignesh R
2017-06-22 13:00 ` Lukasz Majewski
2017-06-27 9:08 ` Vignesh R
2017-06-27 9:53 ` Lukasz Majewski
2018-01-08 17:57 ` Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 07/13] drivers: usb: dwc3: add ti dwc3 misc driver for wrapper Vignesh R
2017-06-13 14:05 ` Marek Vasut
2017-06-14 11:01 ` Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 08/13] usb: gadget: ether: Provide a way to read MAC address Vignesh R
2017-06-13 14:06 ` Marek Vasut
2017-06-14 12:24 ` Vignesh R
2017-06-15 16:58 ` Marek Vasut
2017-06-19 11:03 ` Vignesh R
2017-06-21 7:33 ` Lukasz Majewski
2017-07-06 4:48 ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 09/13] usb: gadget: ether: Populate DM_FLAG_PRE_RELOC flag Vignesh R
2017-06-17 3:42 ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 10/13] usb: gadget: add DWC3 USB gadget support Vignesh R
2017-06-17 3:42 ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 11/13] am43xx: Add USB device boot support Vignesh R
2017-06-17 3:42 ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 12/13] configs: am43xx: Enable configs to support USB device boot Vignesh R
2017-06-17 3:42 ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 13/13] ARM: am437x-gp-evm-u-boot.dtsi: Enable nodes for " Vignesh R
2017-06-13 13:03 ` Lokesh Vutla
2017-06-14 8:53 ` Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170613121009.25860-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox