public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 03/13] am437x: board: do not register usb devices when CONFIG_DM_USB is defined
Date: Tue, 13 Jun 2017 17:39:59 +0530	[thread overview]
Message-ID: <20170613121009.25860-4-vigneshr@ti.com> (raw)
In-Reply-To: <20170613121009.25860-1-vigneshr@ti.com>

From: Mugunthan V N <mugunthanvnm@ti.com>

Do not register usb devices when CONFIG_DM_USB is define.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 board/ti/am43xx/board.c                   | 10 ++--------
 configs/am43xx_evm_usbhost_boot_defconfig |  1 +
 2 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 0bbe366a362c..a2aefc08530a 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -632,7 +632,7 @@ int board_late_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_DWC3
+#if defined(CONFIG_USB_DWC3) && !defined(CONFIG_DM_USB)
 static struct dwc3_device usb_otg_ss1 = {
 	.maximum_speed = USB_SPEED_HIGH,
 	.base = USB_OTG_SS1_BASE,
@@ -668,13 +668,10 @@ static struct ti_usb_phy_device usb_phy2_device = {
 	.usb2_phy_power = (void *)USB2_PHY2_POWER,
 	.index = 1,
 };
-#endif /* CONFIG_USB_DWC3 */
 
-#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
 int omap_xhci_board_usb_init(int index, enum usb_init_type init)
 {
 	enable_usb_clocks(index);
-#ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 		if (init == USB_INIT_DEVICE) {
@@ -697,14 +694,12 @@ int omap_xhci_board_usb_init(int index, enum usb_init_type init)
 	default:
 		printf("Invalid Controller Index\n");
 	}
-#endif
 
 	return 0;
 }
 
 int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init)
 {
-#ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 	case 1:
@@ -717,12 +712,11 @@ int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init)
 	default:
 		printf("Invalid Controller Index\n");
 	}
-#endif
 	disable_usb_clocks(index);
 
 	return 0;
 }
-#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
+#endif /* defined(CONFIG_USB_DWC3) && !defined(CONFIG_DM_USB) */
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index 870ed0fb24ab..e810b86c671c 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -69,6 +69,7 @@ CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
 CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0403
 CONFIG_G_DNL_PRODUCT_NUM=0xbd00
-- 
2.13.0

  parent reply	other threads:[~2017-06-13 12:09 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-13 12:09 [U-Boot] [PATCH v2 00/13] driver model bring-up of dwc3 usb peripheral Vignesh R
2017-06-13 12:09 ` [U-Boot] [PATCH v2 01/13] drivers: usb: dwc3: remove devm_zalloc from linux_compact Vignesh R
2017-06-13 13:58   ` Marek Vasut
2017-06-14  9:05     ` Vignesh R
2017-06-15 16:55       ` Marek Vasut
2017-06-13 12:09 ` [U-Boot] [PATCH v2 02/13] drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board files to drivers Vignesh R
2017-06-13 12:09 ` Vignesh R [this message]
2017-06-13 12:10 ` [U-Boot] [PATCH v2 04/13] omap5/am57xx/dra7xx: board: do not register usb devices when CONFIG_DM_USB is defined Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 05/13] drivers: usb: common: add support to get maximum speed from dt Vignesh R
2017-06-13 14:01   ` Marek Vasut
2017-06-14  9:16     ` Vignesh R
2017-06-15 17:07       ` Marek Vasut
2017-06-13 12:10 ` [U-Boot] [PATCH v2 06/13] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support Vignesh R
2017-06-13 14:03   ` Marek Vasut
2017-06-14 12:25     ` Vignesh R
2017-06-15 16:57       ` Marek Vasut
2017-06-20 12:00         ` Vignesh R
2017-06-20 12:04           ` Marek Vasut
2017-06-20 13:44             ` Lukasz Majewski
2017-06-21  5:12               ` Vignesh R
2017-06-21  8:09                 ` Lukasz Majewski
2017-06-22 12:12                   ` Vignesh R
2017-06-22 13:00                     ` Lukasz Majewski
2017-06-27  9:08                       ` Vignesh R
2017-06-27  9:53                         ` Lukasz Majewski
2018-01-08 17:57                   ` Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 07/13] drivers: usb: dwc3: add ti dwc3 misc driver for wrapper Vignesh R
2017-06-13 14:05   ` Marek Vasut
2017-06-14 11:01     ` Vignesh R
2017-06-13 12:10 ` [U-Boot] [PATCH v2 08/13] usb: gadget: ether: Provide a way to read MAC address Vignesh R
2017-06-13 14:06   ` Marek Vasut
2017-06-14 12:24     ` Vignesh R
2017-06-15 16:58       ` Marek Vasut
2017-06-19 11:03         ` Vignesh R
2017-06-21  7:33           ` Lukasz Majewski
2017-07-06  4:48             ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 09/13] usb: gadget: ether: Populate DM_FLAG_PRE_RELOC flag Vignesh R
2017-06-17  3:42   ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 10/13] usb: gadget: add DWC3 USB gadget support Vignesh R
2017-06-17  3:42   ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 11/13] am43xx: Add USB device boot support Vignesh R
2017-06-17  3:42   ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 12/13] configs: am43xx: Enable configs to support USB device boot Vignesh R
2017-06-17  3:42   ` Simon Glass
2017-06-13 12:10 ` [U-Boot] [PATCH v2 13/13] ARM: am437x-gp-evm-u-boot.dtsi: Enable nodes for " Vignesh R
2017-06-13 13:03   ` Lokesh Vutla
2017-06-14  8:53     ` Vignesh R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170613121009.25860-4-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox