From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 29 Jun 2017 12:49:19 +0200 Subject: [U-Boot] [PATCH V7 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device In-Reply-To: References: <1495702234-29546-1-git-send-email-eddie.cai.linux@gmail.com> <1495702234-29546-5-git-send-email-eddie.cai.linux@gmail.com> <20170529095123.69386562@jawa> <20170531091252.7b04f134@jawa> <20170603162356.2159815a@jawa> <20170621094422.447100b8@jawa> <20170628095546.416032d5@jawa> Message-ID: <20170629124919.599b79d0@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 29 Jun 2017 08:44:47 +0800 Eddie Cai wrote: > > > > The issue is not with this one particular board. > > > > I'm concerned, since your patch set causes build errors for other > > boards. > > > > Can you build test (with travis-CI) your patches and check if you > > can reproduce those errors? > I can reproduce this error with travis-CI. but i can't not reproduce > this rk3036 board error on my desktop. > can you try to local build rk3036 board and see if can reproduce this > error? > > The rk3036 (evb-rk3036_defconfig) builds fine (with my old 4.8 gcc). However, your patches cause other issues [1]: https://travis-ci.org/lmajewski/u-boot-dfu/jobs/248264628 And for example I can reproduce the issue on rock2_defconfig at my local PC. Can you build rock2 on your PC with your patches applied without any issues? [1] The "testing" tree can be found at: https://github.com/lmajewski/u-boot-dfu/tree/testing Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de